How to replace or repair an emblem/nameplate on the front bumper fascia on 2003 Chevrolet Cavalier?

Begin by taping the emblem mounting area before using tape to align it in place during repair. Place the J 25070 Heat Gun (J 25070) 6-inches from the emblem/nameplate surface and move it in circular motions 30 seconds to heat the part. A plastic flat tool helps take the emblem/nameplate off from its panel position. Leave any unmoving tape on the panel or molding then clean both surfaces using adhesive cleaner and a soft fabric. Continue the replacement process when damage exists in the tape. Place new emblem/nameplate onto adhesive foam tape and push it onto its proper position. Use a 3M(TM) Scotch Brite molding adhesive remover disk item 07501 to clean body panels while VMP naphtha or water and isopropyl alcohol mixture works best for plastic panels. Remove all dust and dirt from the installation space using a lint-free cloth. Clean it with the same material and cleaning agent then let it dry completely. To prepare the mounting surface, apply the J 25070 Heat Gun (J 25070) to heat it to 27-41°C (80-105°F). Keep the emblem/nameplate temperature range at 29-32°C (85-90°F). Fit the emblem/nameplate on top of the mounting surface and place it based on alignment marks. Use even pressure when applying the emblem directly on the surface. Take off the protective tape after setting down the emblem/nameplate.

OEM 2003 Chevrolet Cavalier Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Emblems found

View related parts
2003 Chevrolet Cavalier Emblem, Gold
Part Number: 22675391
$45.24 MSRP: $67.33
You Save: $22.09 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem-Radiator Grille *Gold; Emblem, Radiator Grille And Front End Ornamentation
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.2 x 3.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22675391
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS
View related parts
2003 Chevrolet Cavalier Emblem, Rear
Part Number: 22627210
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.4 x 2.2 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22627210
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2003 Chevrolet Cavalier Nameplate, Black, Rear
Part Number: 22591875
Product Specifications
- Other Name: Plate, Rear Compartment Lid, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 9.4 x 1.6 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22591875
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2003 Chevrolet Cavalier Emblem, Rear
Part Number: 16531618
Product Specifications
- Other Name: Emblem, Rear Compartment Lid, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 1.20 Pounds
- Item Dimensions: 28.5 x 5.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16531618
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS
View related parts
2003 Chevrolet Cavalier Nameplate, Rear
Part Number: 22611399
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.2 x 1.5 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22611399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Cavalier Submodels:
- LS, LS Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2003 Chevrolet Cavalier Emblem

With a comprehensive array of OEM 2003 Chevrolet Cavalier Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Cavalier Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Cavalier Emblem Parts Questions & Experts Answers

Q: How to replace or repair an emblem/nameplate on the front bumper fascia on 2003 Chevrolet Cavalier?
A: Begin by taping the emblem mounting area before using tape to align it in place during repair. Place the J 25070 Heat Gun (J 25070) 6-inches from the emblem/nameplate surface and move it in circular motions 30 seconds to heat the part. A plastic flat tool helps take the emblem/nameplate off from its panel position. Leave any unmoving tape on the panel or molding then clean both surfaces using adhesive cleaner and a soft fabric. Continue the replacement process when damage exists in the tape. Place new emblem/nameplate onto adhesive foam tape and push it onto its proper position. Use a 3M(TM) Scotch Brite molding adhesive remover disk item 07501 to clean body panels while VMP naphtha or water and isopropyl alcohol mixture works best for plastic panels. Remove all dust and dirt from the installation space using a lint-free cloth. Clean it with the same material and cleaning agent then let it dry completely. To prepare the mounting surface, apply the J 25070 Heat Gun (J 25070) to heat it to 27-41°C (80-105°F). Keep the emblem/nameplate temperature range at 29-32°C (85-90°F). Fit the emblem/nameplate on top of the mounting surface and place it based on alignment marks. Use even pressure when applying the emblem directly on the surface. Take off the protective tape after setting down the emblem/nameplate.