How to replace an emblem or nameplate on a door on 2002 Chevrolet Cavalier?

Apply tape to protect the door mounting surface before placing alignment marks. A heat gun (J 25070) should be used to heat the emblem/nameplate by moving in a circular pattern for thirty seconds at a distance of about 152 mm (6 in). Detach the emblem/nameplate with a plastic tool that has a flat edge. You can use a 3m(tm) scotch brite molding adhesive remover disk (3m(tm) p/n 07501) on body panels while plastic panels require either varnish makers and painters (vmp) naphtha or a 50/50 mixture of isopropyl alcohol and water on a lint-free cloth. Dry the installation area with the same cleaning solution after wiping the area with the cloth. Apply tape to mark the placement when no indicators are present before using sunfire or sunfire gt emblem/nameplate dimensions. Heat the mounting surface between 27-41°C (80-105°F) using the heat gun (J 25070) only when needed while maintaining the emblem/nameplate temp at 29-32°C (85-90°F). Cut the protective liner without handling the adhesive. Align the emblem/nameplate following the provided marks while pressing evenly onto the surface. The last step involves removing tape from the mounting area.

OEM 2002 Chevrolet Cavalier Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Emblems found

View related parts
2002 Chevrolet Cavalier Emblem Part Number: 22613201
$31.46 MSRP: $45.01
You Save: $13.55 (31%)
ADD TO CART
Product Specifications
- Other Name: Emblem, Hood Panel Ornamentation
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.8 x 2.8 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22613201
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2002 Chevrolet Cavalier Decal, Front Part Number: 22623646
$6.96 MSRP: $10.35
You Save: $3.39 (33%)
Product Specifications
- Other Name: Emblem, Front Fender Name; Nameplate
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.6 x 2.6 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22623646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Cavalier Submodels:
- Z24 | 4 Cyl 2.4 L GAS
View related parts
2002 Chevrolet Cavalier Emblem, Rear Part Number: 22627210
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.4 x 2.2 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22627210
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2002 Chevrolet Cavalier Emblem, Rear Part Number: 22591877
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.1 x 2.7 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22591877
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Cavalier Submodels:
- Z24 | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2002 Chevrolet Cavalier Nameplate, Rear Part Number: 22611399
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.2 x 1.5 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22611399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Cavalier Submodels:
- LS, LS Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2002 Chevrolet Cavalier Nameplate, Black, Rear Part Number: 22591875
Product Specifications
- Other Name: Plate, Rear Compartment Lid, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 9.4 x 1.6 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22591875
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2002 Chevrolet Cavalier Nameplate, Black, Rear Part Number: 22591874
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.3 x 1.2 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22591874
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Cavalier Submodels:
- LS, LS Sport, RS | 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS

2002 Chevrolet Cavalier Emblem

With a comprehensive array of OEM 2002 Chevrolet Cavalier Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Cavalier Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Cavalier Emblem Parts and Q&A

Q: How to replace an emblem or nameplate on a door on 2002 Chevrolet Cavalier?
A: Apply tape to protect the door mounting surface before placing alignment marks. A heat gun (J 25070) should be used to heat the emblem/nameplate by moving in a circular pattern for thirty seconds at a distance of about 152 mm (6 in). Detach the emblem/nameplate with a plastic tool that has a flat edge. You can use a 3m(tm) scotch brite molding adhesive remover disk (3m(tm) p/n 07501) on body panels while plastic panels require either varnish makers and painters (vmp) naphtha or a 50/50 mixture of isopropyl alcohol and water on a lint-free cloth. Dry the installation area with the same cleaning solution after wiping the area with the cloth. Apply tape to mark the placement when no indicators are present before using sunfire or sunfire gt emblem/nameplate dimensions. Heat the mounting surface between 27-41°C (80-105°F) using the heat gun (J 25070) only when needed while maintaining the emblem/nameplate temp at 29-32°C (85-90°F). Cut the protective liner without handling the adhesive. Align the emblem/nameplate following the provided marks while pressing evenly onto the surface. The last step involves removing tape from the mounting area.