How to replace or repair an emblem/nameplate on 2001 Chevrolet Cavalier?

Securely tape the nameplate area but keep marks to help you install it later. Soak the emblem/nameplate with heat from the Heat Gun J 25070 for 30 seconds while rotating it before lifting it off with a plastic flat tool to prevent body harm. When the tape stays intact on the panel use adhesive cleaner and a lint-free cloth to clean both surfaces. A fresh tape replacement process follows if the tape becomes damaged. Press the new emblem/nameplate onto the adhesive foam tape before placing it on the surface. Use a 3M(TM) Scotch Brite molding adhesive remover disc (Part 07501) with body panels and WMP naphtha mixture with a lint-free fabric for plastic panels when removing glue. Clean and prepare the installation space by wiping it with the same naphtha or alcohol mixture. Then make sure all moisture is gone. Space the emblem 15 mm down on the deck lid and set "Cavalier" 9 mm from "2.4" followed by a 350 mm mark 13 3/4 inches from the right edge. Apply heat to the symbol placement surface until it reaches 80-105 degrees Fahrenheit (27-41 degrees Celsius) and make sure the emblem is around 85-90 degrees Fahrenheit (29-32 degrees Celsius). Set the emblem/nameplate into the correct position following the marks on the surface and combine firm pressure to achieve adequate adhesion before cutting the tape on the mounting surface.

OEM 2001 Chevrolet Cavalier Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Emblems found

View related parts
2001 Chevrolet Cavalier Decal, Front
Part Number: 22623646
$6.96 MSRP: $10.35
You Save: $3.39 (33%)
Product Specifications
- Other Name: Emblem, Front Fender Name; Nameplate
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.6 x 2.6 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22623646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Cavalier Submodels:
- Z24 | 4 Cyl 2.4 L GAS
View related parts
2001 Chevrolet Cavalier Emblem
Part Number: 22613201
Product Specifications
- Other Name: Emblem, Hood Panel Ornamentation
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.8 x 2.8 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22613201
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2001 Chevrolet Cavalier Emblem, Rear
Part Number: 22627210
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.4 x 2.2 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22627210
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2001 Chevrolet Cavalier Emblem, Rear
Part Number: 22591877
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.1 x 2.7 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22591877
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Cavalier Submodels:
- Z24 | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2001 Chevrolet Cavalier Nameplate, Rear
Part Number: 22611399
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.2 x 1.5 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22611399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Cavalier Submodels:
- LS, LS Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2001 Chevrolet Cavalier Nameplate, Black, Rear
Part Number: 22591875
Product Specifications
- Other Name: Plate, Rear Compartment Lid, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 9.4 x 1.6 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22591875
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2001 Chevrolet Cavalier Nameplate, Black, Rear
Part Number: 22591874
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.3 x 1.2 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22591874
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Cavalier Submodels:
- LS, LS Sport, RS | 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS

2001 Chevrolet Cavalier Emblem

With a comprehensive array of OEM 2001 Chevrolet Cavalier Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Cavalier Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Cavalier Emblem Parts Questions & Experts Answers

Q: How to replace or repair an emblem/nameplate on 2001 Chevrolet Cavalier?
A: Securely tape the nameplate area but keep marks to help you install it later. Soak the emblem/nameplate with heat from the Heat Gun J 25070 for 30 seconds while rotating it before lifting it off with a plastic flat tool to prevent body harm. When the tape stays intact on the panel use adhesive cleaner and a lint-free cloth to clean both surfaces. A fresh tape replacement process follows if the tape becomes damaged. Press the new emblem/nameplate onto the adhesive foam tape before placing it on the surface. Use a 3M(TM) Scotch Brite molding adhesive remover disc (Part 07501) with body panels and WMP naphtha mixture with a lint-free fabric for plastic panels when removing glue. Clean and prepare the installation space by wiping it with the same naphtha or alcohol mixture. Then make sure all moisture is gone. Space the emblem 15 mm down on the deck lid and set "Cavalier" 9 mm from "2.4" followed by a 350 mm mark 13 3/4 inches from the right edge. Apply heat to the symbol placement surface until it reaches 80-105 degrees Fahrenheit (27-41 degrees Celsius) and make sure the emblem is around 85-90 degrees Fahrenheit (29-32 degrees Celsius). Set the emblem/nameplate into the correct position following the marks on the surface and combine firm pressure to achieve adequate adhesion before cutting the tape on the mounting surface.