How to replace the exterior Emblem on 2000 Chevrolet Cavalier?

Start by masking tape-wrapping nearby finishes to protect them before beginning the exterior trim molding or nameplate replacement. A body caulking compound combined with presealed screws, nuts and clips protects the body interior from water intrusion through holes and bolts and clips. Moldings should never undergo adhesive removal with rotating discs because such heat production may harm the molding. Before attaching exterior trim elements your technician should maintain the body surface and all components at a temperature range of 21°-38° C (70°-100°F) allowing auxiliary heat sources as needed. The removal procedure needs clean moldings which must be free of wax residue and oily film. Do not pull out the tape when it stays in place with a loose molding and keep it active. Use soap and water to wash the area which needs drying. Clean affected areas using 3M General Purpose Adhesive Cleaner P/N 08984 and a clean rag exclusively on areas without air-dry enamel. Use masking tape to create a molding guide or position it with a straight edge if needed. To keep the tape in place apply Loctite 414 adhesive GM P/N 1052621 at the back of the molding before positioning for 30 seconds to achieve a strong bond. The body requires double-coated acrylic foam tape where 3M Super Automotive Attachment represents the optimal choice with options P/Ns 06380 (white), 06377 (black), or 06382 (grey) for attachment.

OEM 2000 Chevrolet Cavalier Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Emblems found

View related parts
2000 Chevrolet Cavalier Decal, Front
Part Number: 22623646
$6.96 MSRP: $10.35
You Save: $3.39 (33%)
Product Specifications
- Other Name: Emblem, Front Fender Name; Nameplate
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.6 x 2.6 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22623646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Cavalier Submodels:
- Z24 | 4 Cyl 2.4 L GAS
View related parts
2000 Chevrolet Cavalier Emblem
Part Number: 22613201
Product Specifications
- Other Name: Emblem, Hood Panel Ornamentation
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.8 x 2.8 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22613201
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2000 Chevrolet Cavalier Emblem, Rear
Part Number: 22627210
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.4 x 2.2 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22627210
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2000 Chevrolet Cavalier Emblem, Rear
Part Number: 22591877
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.1 x 2.7 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22591877
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Cavalier Submodels:
- Z24 | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2000 Chevrolet Cavalier Nameplate, Rear
Part Number: 22611399
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.2 x 1.5 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22611399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Cavalier Submodels:
- LS, LS Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2000 Chevrolet Cavalier Nameplate, Black, Rear
Part Number: 22591875
Product Specifications
- Other Name: Plate, Rear Compartment Lid, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 9.4 x 1.6 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22591875
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2000 Chevrolet Cavalier Nameplate, Black, Rear
Part Number: 22591874
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.3 x 1.2 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22591874
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Cavalier Submodels:
- LS, LS Sport, RS | 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS

2000 Chevrolet Cavalier Emblem

With a comprehensive array of OEM 2000 Chevrolet Cavalier Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Cavalier Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Cavalier Emblem Parts Questions & Experts Answers

Q: How to replace the exterior Emblem on 2000 Chevrolet Cavalier?
A: Start by masking tape-wrapping nearby finishes to protect them before beginning the exterior trim molding or nameplate replacement. A body caulking compound combined with presealed screws, nuts and clips protects the body interior from water intrusion through holes and bolts and clips. Moldings should never undergo adhesive removal with rotating discs because such heat production may harm the molding. Before attaching exterior trim elements your technician should maintain the body surface and all components at a temperature range of 21°-38° C (70°-100°F) allowing auxiliary heat sources as needed. The removal procedure needs clean moldings which must be free of wax residue and oily film. Do not pull out the tape when it stays in place with a loose molding and keep it active. Use soap and water to wash the area which needs drying. Clean affected areas using 3M General Purpose Adhesive Cleaner P/N 08984 and a clean rag exclusively on areas without air-dry enamel. Use masking tape to create a molding guide or position it with a straight edge if needed. To keep the tape in place apply Loctite 414 adhesive GM P/N 1052621 at the back of the molding before positioning for 30 seconds to achieve a strong bond. The body requires double-coated acrylic foam tape where 3M Super Automotive Attachment represents the optimal choice with options P/Ns 06380 (white), 06377 (black), or 06382 (grey) for attachment.