How to replace the rear brake calipers on 2003 Chevrolet Corvette?

Check the brake master cylinder reservoir fluid level before undertaking a rear brake caliper replacement. The observation point of fluid level should be between complete and minimum capacity for no draining yet requires fluid extraction to the midpoint if the level goes above midrange. Following support of the vehicle you should remove the tire and wheel assembly before continuing. Begin by disconnecting the brake caliper inlet fitting bolt and brake hose and discard the two copper brake hose gaskets that might adhere to the caliper or hose end. First plug the holes in brake caliper and hose to avoid fluid loss and contamination but remove the guide pin bolts to detach the caliper from its mounting bracket. Check the slide boots on the calipers for damage. if necessary, replace them. Fit the brake caliper to the mounting bracket after which tighten the brake caliper guide pin bolts to 31 Nm (23 ft. lbs.). Connect new copper brake hose gaskets with the brake caliper inlet fitting bolt to the brake hose followed by tightening the bolt to 50 Nm (37 ft. lbs.). After bleeding the hydraulic brake system replace the wheel with tire then lower the vehicle back to the ground.

OEM 2003 Chevrolet Corvette Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Calipers found

View related parts
2003 Chevrolet Corvette Caliper, Rear Passenger Side
Part Number: 88895131
$110.84 MSRP: $197.91
You Save: $87.07 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Passenger Side
- Item Weight: 3.10 Pounds
- Item Dimensions: 8.2 x 8.2 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88895131
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
2003 Chevrolet Corvette Caliper, Passenger Side
Part Number: 88895129
Product Specifications
- Other Name: Caliper Kit, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
- Item Weight: 5.40 Pounds
- Item Dimensions: 9.2 x 4.2 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88895129
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
2003 Chevrolet Corvette Caliper, Driver Side
Part Number: 88895128
Product Specifications
- Other Name: Caliper Kit, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.3 x 4.1 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88895128
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
2003 Chevrolet Corvette Caliper, Driver Side
Part Number: 12530683
Product Specifications
- Other Name: Caliper Kit, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
- Item Weight: 5.50 Pounds
- Item Dimensions: 9.4 x 9.7 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12530683
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2003 Chevrolet Corvette Caliper, Passenger Side
Part Number: 12530684
Product Specifications
- Other Name: Caliper Kit, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
- Item Weight: 3.40 Pounds
- Item Dimensions: 7.1 x 7.7 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12530684
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2003 Chevrolet Corvette Caliper, Passenger Side
Part Number: 12530682
Product Specifications
- Other Name: Caliper Kit, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
- Item Weight: 5.60 Pounds
- Item Dimensions: 9.3 x 9.8 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12530682
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2003 Chevrolet Corvette Caliper, Rear Driver Side
Part Number: 88895130
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
- Item Weight: 3.00 Pounds
- Item Dimensions: 8.4 x 8.4 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88895130
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
2003 Chevrolet Corvette Caliper, Rear Driver Side
Part Number: 12530685
Product Specifications
- Other Name: Caliper Kit, Rear Brake Left; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
- Item Weight: 3.30 Pounds
- Item Dimensions: 7.1 x 7.6 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12530685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS

2003 Chevrolet Corvette Brake Calipers

With a comprehensive array of OEM 2003 Chevrolet Corvette Brake Calipers, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Corvette Brake Calipers are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Corvette Brake Calipers Parts Questions & Experts Answers

Q: How to replace the rear brake calipers on 2003 Chevrolet Corvette?
A: Check the brake master cylinder reservoir fluid level before undertaking a rear brake caliper replacement. The observation point of fluid level should be between complete and minimum capacity for no draining yet requires fluid extraction to the midpoint if the level goes above midrange. Following support of the vehicle you should remove the tire and wheel assembly before continuing. Begin by disconnecting the brake caliper inlet fitting bolt and brake hose and discard the two copper brake hose gaskets that might adhere to the caliper or hose end. First plug the holes in brake caliper and hose to avoid fluid loss and contamination but remove the guide pin bolts to detach the caliper from its mounting bracket. Check the slide boots on the calipers for damage. if necessary, replace them. Fit the brake caliper to the mounting bracket after which tighten the brake caliper guide pin bolts to 31 Nm (23 ft. lbs.). Connect new copper brake hose gaskets with the brake caliper inlet fitting bolt to the brake hose followed by tightening the bolt to 50 Nm (37 ft. lbs.). After bleeding the hydraulic brake system replace the wheel with tire then lower the vehicle back to the ground.

Related 2003 Chevrolet Corvette Parts

Alternate Year Models

2002 Chevrolet Corvette Brake Calipers 2004 Chevrolet Corvette Brake Calipers