How to replace the front brake calipers on 2004 Chevrolet Corvette?

Start front brake caliper replacement by checking the brake master cylinder reservoir fluid level before continuing. The fluid level should stay between full and minimum points so no draining is necessary yet excess fluid demands lowering to a midpoint. Raise your vehicle before you take off the tire while keeping it supported. The next step requires removing both the brake caliper inlet bolt and the hose from the caliper due to discarding attached copper gaskets from the ends of the caliper and hose. Seal the openings on the brake caliper and brake hose before you remove the caliper guide pin bolts to free up the caliper from the mounting bracket. When installing the caliper check for damage in the slide boots then replace any faulty ones you find. Reinstall the brake caliper onto the mounting bracket by using 31 Nm (23 ft. lbs.) torque setting when tightening the brake caliper guide pin bolts. You must install NEW copper brake hose gaskets while installing the brake caliper inlet fitting bolt to the brake hose with a bolt torque setting of 50 Nm (37 ft. lbs.). Close the hydraulic brake system and put back the tire and wheel unit before lowering the vehicle.

OEM 2004 Chevrolet Corvette Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Calipers found

View related parts
2004 Chevrolet Corvette Caliper, Rear Passenger Side Part Number: 88895131
$101.97 MSRP: $197.91
You Save: $95.94 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Passenger Side
- Item Weight: 3.10 Pounds
- Item Dimensions: 8.2 x 8.2 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88895131
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
2004 Chevrolet Corvette Caliper, Passenger Side Part Number: 88895129
Product Specifications
- Other Name: Caliper Kit, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
- Item Weight: 5.40 Pounds
- Item Dimensions: 9.2 x 4.2 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88895129
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
2004 Chevrolet Corvette Caliper, Driver Side Part Number: 88895128
Product Specifications
- Other Name: Caliper Kit, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.3 x 4.1 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88895128
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
2004 Chevrolet Corvette Caliper, Driver Side Part Number: 12530683
Product Specifications
- Other Name: Caliper Kit, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
- Item Weight: 5.50 Pounds
- Item Dimensions: 9.4 x 9.7 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12530683
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2004 Chevrolet Corvette Caliper, Passenger Side Part Number: 12530684
Product Specifications
- Other Name: Caliper Kit, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
- Item Weight: 3.40 Pounds
- Item Dimensions: 7.1 x 7.7 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12530684
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2004 Chevrolet Corvette Caliper, Passenger Side Part Number: 12530682
Product Specifications
- Other Name: Caliper Kit, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
- Item Weight: 5.60 Pounds
- Item Dimensions: 9.3 x 9.8 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12530682
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2004 Chevrolet Corvette Caliper, Rear Driver Side Part Number: 88895130
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
- Item Weight: 3.00 Pounds
- Item Dimensions: 8.4 x 8.4 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88895130
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
2004 Chevrolet Corvette Caliper, Rear Driver Side Part Number: 12530685
Product Specifications
- Other Name: Caliper Kit, Rear Brake Left; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
- Item Weight: 3.30 Pounds
- Item Dimensions: 7.1 x 7.6 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12530685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS

2004 Chevrolet Corvette Brake Calipers

With a comprehensive array of OEM 2004 Chevrolet Corvette Brake Calipers, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Corvette Brake Calipers are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Corvette Brake Calipers Parts Questions & Experts Answers

Q: How to replace the front brake calipers on 2004 Chevrolet Corvette?
A: Start front brake caliper replacement by checking the brake master cylinder reservoir fluid level before continuing. The fluid level should stay between full and minimum points so no draining is necessary yet excess fluid demands lowering to a midpoint. Raise your vehicle before you take off the tire while keeping it supported. The next step requires removing both the brake caliper inlet bolt and the hose from the caliper due to discarding attached copper gaskets from the ends of the caliper and hose. Seal the openings on the brake caliper and brake hose before you remove the caliper guide pin bolts to free up the caliper from the mounting bracket. When installing the caliper check for damage in the slide boots then replace any faulty ones you find. Reinstall the brake caliper onto the mounting bracket by using 31 Nm (23 ft. lbs.) torque setting when tightening the brake caliper guide pin bolts. You must install NEW copper brake hose gaskets while installing the brake caliper inlet fitting bolt to the brake hose with a bolt torque setting of 50 Nm (37 ft. lbs.). Close the hydraulic brake system and put back the tire and wheel unit before lowering the vehicle.