OEM 2003 Chevrolet Impala Power Steering Pump

2003 Chevrolet Impala Power Steering Pump Parts Questions & Experts Answers

• Q: How to replace the power steering pump on 2003 Chevrolet Impala?

  A: Beginning the Power Steering Pump replacement requires placing a drain pan under the vehicle and removing the coolant recovery reservoir. Remove the Power Steering Pump pulley before disconnecting the ignition wiring harness that is near the pump. Begin by disconnecting both the power steering pressure line and power steering return hose while removing all mounting bolts from the Power Steering Pump assembly until both components can be extracted with the reservoir. Install the Power Steering Pump reservoir to the pump before positioning it on the engine where you should tighten the mounting bolts to 34 n.m (25 lb ft). First reattach the power steering pressure hose together with the return hose before installing the ignition control harness and power steering pulley. The coolant recovery reservoir requires reinstallation before you should fill the power steering system and bleed it while inspecting for leaks before emptying the drain pan from underneath.