How to Replace a Power Steering Hose for Pressure Hose on 2003 Chevrolet Impala?

The procedure for replacing power steering pressure hose begins with placing a drain pan under the vehicle then removing the power steering pressure line from the pump and the engine bracket. The power steering pressure line exists as the downward line at the power steering gear and technicians can access it through the engine compartment between the rocker arm cover and the front of the dash mat. Support the vehicle properly before detaching the power steering pressure line from its clamps on the power steering gear and removing it from the vehicle. Begin by reinstalling the power steering pressure line through the vehicle because next you must connect it to the power steering gear clamps after you lower the vehicle. To install the power steering pressure line attach it to the power steering gear while tightening the fitting to 27 n.m (20 lb ft). Fasten the line between the engine-retaining bracket and Power Steering Pump and achieve proper tightness at 27 n.m (20 lb ft). Modernizing the power steering system involves power steering fluid addition and system bleeding with a final check for leaks.

OEM 2003 Chevrolet Impala Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Power Steering Hoses found

View related parts
2003 Chevrolet Impala Power Steering Cooler Tube
Part Number: 10306242
$83.72 MSRP: $131.14
You Save: $47.42 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Steering Fluid Cooler
- Item Weight: 5.30 Pounds
- Item Dimensions: 35.4 x 20.1 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10306242
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2003 Chevrolet Impala Power Steering Pressure Hose
Part Number: 21993842
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Replaces: 26083979, 26070141
- Item Weight: 1.80 Pounds
- Item Dimensions: 4.1 x 20.0 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21993842
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Impala Submodels:
- Base | 6 Cyl 3.4 L GAS
View related parts
2003 Chevrolet Impala Power Steering Return Hose
Part Number: 26077754
Product Specifications
- Other Name: Pipe, Steering Gear Oil Return; Power Steering Hose; Return Hose; Return Tube; Upper Return Hose; Hose, Steering Gear Oil Return
- Item Weight: 0.60 Pounds
- Item Dimensions: 20.7 x 5.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26077754
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2003 Chevrolet Impala Pipe Kit, Passenger Side
Part Number: 26055484
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Fluid Pipe; Line Kit; Tube; Pipe
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.7 x 18.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26055484
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2003 Chevrolet Impala Power Steering Pressure Hose
Part Number: 26064185
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Item Weight: 1.80 Pounds
- Item Dimensions: 44.6 x 9.7 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26064185
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Impala Submodels:
- Base, LS, LS Sport, Police, SS | 6 Cyl 3.8 L GAS
View related parts
2003 Chevrolet Impala Pipe Kit, Driver Side
Part Number: 26065126
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Fluid Pipe; Line Kit; Tube; Pipe
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.0 x 10.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26065126
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2003 Chevrolet Impala Power Steering Hose

With a comprehensive array of OEM 2003 Chevrolet Impala Power Steering Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Impala Power Steering Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Impala Power Steering Hose Parts Questions & Experts Answers

Q: How to Replace a Power Steering Hose for Pressure Hose on 2003 Chevrolet Impala?
A: The procedure for replacing power steering pressure hose begins with placing a drain pan under the vehicle then removing the power steering pressure line from the pump and the engine bracket. The power steering pressure line exists as the downward line at the power steering gear and technicians can access it through the engine compartment between the rocker arm cover and the front of the dash mat. Support the vehicle properly before detaching the power steering pressure line from its clamps on the power steering gear and removing it from the vehicle. Begin by reinstalling the power steering pressure line through the vehicle because next you must connect it to the power steering gear clamps after you lower the vehicle. To install the power steering pressure line attach it to the power steering gear while tightening the fitting to 27 n.m (20 lb ft). Fasten the line between the engine-retaining bracket and Power Steering Pump and achieve proper tightness at 27 n.m (20 lb ft). Modernizing the power steering system involves power steering fluid addition and system bleeding with a final check for leaks.