How to Replace a Power Steering Hose on a 3.8L Engine for Return Hose on 2004 Chevrolet Impala?

A proper replacement of the power steering return hose on a 3.8l engine starts with vehicle lift followed by tire removal. The power steering return hose needs detachment both from the power steering gear and from all clips located on the power steering gear. Take the return hose away from the Power Steering Pump and also detach it from each hose retainer located on the cradle. Once disconnected from return hose electrical harnesses and clips the mechanic should remove the hose from the vehicle body. First place the return hose back inside the vehicle and reattach clips and electrical harnesses to it before locking them into position at the cradle hose retainers. Begin by attaching the return hose to the Power Steering Pump before mounting it onto the clips situated on the power steering gear. Follow the installation procedure by using torque to fasten the return hose fitting to the power steering gear to 27 nm (20 ft. Lbs.). The process concludes with tire and wheel assembly reinstallation then vehicle lowering becomes necessary followed by power steering fluid reservoir filling up and bleeding the power steering system and leak inspection steps.

OEM 2004 Chevrolet Impala Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Power Steering Hoses found

View related parts
2004 Chevrolet Impala Power Steering Cooler Tube
Part Number: 26081253
$66.09 MSRP: $104.93
You Save: $38.84 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Steering Fluid Cooler
- Item Weight: 1.20 Pounds
- Item Dimensions: 29.4 x 25.2 x 11.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26081253
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Impala Submodels:
- Base, LS, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Impala Power Steering Pressure Hose
Part Number: 21993842
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Replaces: 26083979, 26070141
- Item Weight: 1.80 Pounds
- Item Dimensions: 4.1 x 20.0 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21993842
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Impala Submodels:
- Base | 6 Cyl 3.4 L GAS
View related parts
2004 Chevrolet Impala Power Steering Return Hose
Part Number: 26077754
Product Specifications
- Other Name: Pipe, Steering Gear Oil Return; Power Steering Hose; Return Hose; Return Tube; Upper Return Hose; Hose, Steering Gear Oil Return
- Item Weight: 0.60 Pounds
- Item Dimensions: 20.7 x 5.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26077754
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Impala Pipe Kit, Passenger Side
Part Number: 26055484
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Fluid Pipe; Line Kit; Tube; Pipe
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.7 x 18.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26055484
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2004 Chevrolet Impala Power Steering Pressure Hose
Part Number: 26064185
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Item Weight: 1.80 Pounds
- Item Dimensions: 44.6 x 9.7 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26064185
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Impala Submodels:
- Base, LS, LS Sport, Police, SS | 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Impala Pipe Kit, Driver Side
Part Number: 26065126
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Fluid Pipe; Line Kit; Tube; Pipe
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.0 x 10.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26065126
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2004 Chevrolet Impala Power Steering Hose

With a comprehensive array of OEM 2004 Chevrolet Impala Power Steering Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Impala Power Steering Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Impala Power Steering Hose Parts Questions & Experts Answers

Q: How to Replace a Power Steering Hose on a 3.8L Engine for Return Hose on 2004 Chevrolet Impala?
A: A proper replacement of the power steering return hose on a 3.8l engine starts with vehicle lift followed by tire removal. The power steering return hose needs detachment both from the power steering gear and from all clips located on the power steering gear. Take the return hose away from the Power Steering Pump and also detach it from each hose retainer located on the cradle. Once disconnected from return hose electrical harnesses and clips the mechanic should remove the hose from the vehicle body. First place the return hose back inside the vehicle and reattach clips and electrical harnesses to it before locking them into position at the cradle hose retainers. Begin by attaching the return hose to the Power Steering Pump before mounting it onto the clips situated on the power steering gear. Follow the installation procedure by using torque to fasten the return hose fitting to the power steering gear to 27 nm (20 ft. Lbs.). The process concludes with tire and wheel assembly reinstallation then vehicle lowering becomes necessary followed by power steering fluid reservoir filling up and bleeding the power steering system and leak inspection steps.