How to Replace a Power Steering Hose for a 3.8L Engine for Return Hose on 2005 Chevrolet Impala?

The first step to replace the power steering return hose (3.8L) requires support and elevation of the vehicle while removing the tire and wheel assembly. Start by detaching the power steering return hose from the power steering gear while taking it out from the clips on the power steering gear. Remove the return hose connections from Power Steering Pump as well as from its retainers on the cradle. Disconnection of clips and electrical harnesses from the return hose is necessary before you remove it from the vehicle. The first step of installation involves attaching the return hose to the vehicle and reattaching clips and electrical harnesses. After securely attaching the return hose to hose retainers on the cradle and Power Steering Pump you should connect it to clips located on the power steering gear . The return hose installation on the power steering gear should be correct and the fitting requires tightening to 27 nm (20 ft. Lbs.). To finish the process you need to install the tire alongside the wheel assembly then lower the vehicle after filling the power steering reservoir while conducting a power steering bleed followed by leak inspection.

OEM 2005 Chevrolet Impala Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Power Steering Hoses found

View related parts
2005 Chevrolet Impala Power Steering Cooler Tube
Part Number: 10306242
$83.72 MSRP: $131.14
You Save: $47.42 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Steering Fluid Cooler
- Item Weight: 5.30 Pounds
- Item Dimensions: 35.4 x 20.1 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10306242
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2005 Chevrolet Impala Power Steering Pressure Hose
Part Number: 21993842
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Replaces: 26083979, 26070141
- Item Weight: 1.80 Pounds
- Item Dimensions: 4.1 x 20.0 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21993842
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Impala Submodels:
- Base | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Impala Power Steering Return Hose
Part Number: 26077754
Product Specifications
- Other Name: Pipe, Steering Gear Oil Return; Power Steering Hose; Return Hose; Return Tube; Upper Return Hose; Hose, Steering Gear Oil Return
- Item Weight: 0.60 Pounds
- Item Dimensions: 20.7 x 5.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26077754
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2005 Chevrolet Impala Pipe Kit, Passenger Side
Part Number: 26055484
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Fluid Pipe; Line Kit; Tube; Pipe
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.7 x 18.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26055484
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 Chevrolet Impala Power Steering Pressure Hose
Part Number: 26064185
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Item Weight: 1.80 Pounds
- Item Dimensions: 44.6 x 9.7 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26064185
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Impala Submodels:
- Base, LS, LS Sport, Police, SS | 6 Cyl 3.8 L GAS
View related parts
2005 Chevrolet Impala Pipe Kit, Driver Side
Part Number: 26065126
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Fluid Pipe; Line Kit; Tube; Pipe
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.0 x 10.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26065126
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2005 Chevrolet Impala Power Steering Hose

With a comprehensive array of OEM 2005 Chevrolet Impala Power Steering Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Impala Power Steering Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Impala Power Steering Hose Parts Questions & Experts Answers

Q: How to Replace a Power Steering Hose for a 3.8L Engine for Return Hose on 2005 Chevrolet Impala?
A: The first step to replace the power steering return hose (3.8L) requires support and elevation of the vehicle while removing the tire and wheel assembly. Start by detaching the power steering return hose from the power steering gear while taking it out from the clips on the power steering gear. Remove the return hose connections from Power Steering Pump as well as from its retainers on the cradle. Disconnection of clips and electrical harnesses from the return hose is necessary before you remove it from the vehicle. The first step of installation involves attaching the return hose to the vehicle and reattaching clips and electrical harnesses. After securely attaching the return hose to hose retainers on the cradle and Power Steering Pump you should connect it to clips located on the power steering gear . The return hose installation on the power steering gear should be correct and the fitting requires tightening to 27 nm (20 ft. Lbs.). To finish the process you need to install the tire alongside the wheel assembly then lower the vehicle after filling the power steering reservoir while conducting a power steering bleed followed by leak inspection.