OEM 2003 Chevrolet Impala Washer Reservoir

2003 Chevrolet Impala Washer Reservoir Parts and Q&A

• Q: How to replace the washer reservoir on 2003 Chevrolet Impala?

  A: Begin replacing the Washer Reservoir by draining all fluid from it then unlocking its filler opening. First remove the right headlamp but keep your attention on the Washer Reservoir. Start by pulling out the fender liner from the front to access the washer components. Detach the washer pump hose from its connection, remove the washer pump and solvent sensor electrical plugs. Unscrew the Washer Reservoir bracket screw when you are ready to pull the reservoir out through the right frame rail. Put new Washer Reservoir onto the right frame rail and snap it in place while tightening the bracket screw to 10 n.m (89 lb in). Connect each of the washer pump, Washer Reservoir level sensor, and washer pump electrical connector terminals. Place back the front fender liner and Washer Reservoir screws before tightening them to 10 n.m (89 lb in). Attach the right headlamp unit and fix the filler neck before adding washer solvent into the new reservoir.