OEM 2003 Chevrolet Malibu Harmonic Balancer

2003 Chevrolet Malibu Harmonic Balancer Parts Questions & Experts Answers

• Q: How to replace the harmonic balancer on 2003 Chevrolet Malibu?

  A: The necessary tools for Crankshaft balancer replacement include Harmonic Balancer puller (J 24420-C) together with Crankshaft balancer installer (J 29113). Start the process by taking off the Drive Belt and afterward raise the vehicle with support systems in place. Wear right front wheel and tire before removing the right front fender liner and the flywheel inspection cover. The balancer retaining bolt needs removal with help from an assistant who will maintain the flywheel from rotating. Place the Harmonic Balancer puller (J 24420-C) device on the balancer before using the puller screw to detach the component. The installation process starts with oiling the front cover seal contact area followed by applying gm p/n 1052917 rtv sealant or equivalent to the Crankshaft key and keyway. Set the balancer onto the Crankshaft key and install the Crankshaft balancer installer (J 29113) on the Crankshaft to draw the balancer into its position. Reinstall the balancer retaining bolt only after securing the flywheel between two assistants while tightening it to 103 nm (76 ft. Lbs.). After installing the Drive Belt the proper procedure includes reattaching the flywheel inspection cover along with right front fender liner and right tire with wheel followed by lowering the vehicle. Complete the procedure to learn variations from the Crankshaft position.