How to replace the front outside door handle on 2003 Chevrolet Monte Carlo?

The first step in replacing a Monte Carlo front outside door handle is to make sure the window is completely raised while using two layers of masking tape to protect painted surfaces before beginning. The first step involves removing the front door trim panel followed by the water deflector along with the rear window channel bolt which paves the way to detach the rear window channel by gently pulling it down. Start by taking out the outside door handle rod-to-lock clip while detaching it from the lock cylinder. To access one of the outer door handle bolts you must first remove its hole plug followed by the handle itself and rod. The first step when installing consists of fitting the door handle rod and attaching the lock cylinder retainer clip to both components. Tighten the front outside door handle bolts on the door to reach 10 N.m (89 lb in). Put back the lock cylinder then install a fresh outside handle rod-to-lock clip where you eliminate all free movement of the rod. Position the clip cover over the threaded rod before reinstalling the rear window channel while making sure the up clip locks into place followed by securing it with the bolt that should be tightened to 10 N.m force (89 lb in). Reattach the access hole plug with the water deflector and the trim panel in the end.

OEM 2003 Chevrolet Monte Carlo Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Door Handles found

View related parts
2003 Chevrolet Monte Carlo Handle, Outside, Blue, Passenger Side
Part Number: 10435890
$52.31 MSRP: $74.85
You Save: $22.54 (31%)
ADD TO CART
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.9 x 4.9 x 11.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10435890
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2003 Chevrolet Monte Carlo Handle, Outside, Blue, Driver Side
Part Number: 10435891
$42.33 MSRP: $81.45
You Save: $39.12 (49%)
ADD TO CART
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Driver Side
- Replaces: 10436864, 10436866
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.1 x 5.2 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10435891
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2003 Chevrolet Monte Carlo Handle, Inside, Passenger Side
Part Number: 10434212
$11.77 MSRP: $21.27
You Save: $9.50 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, Door Lock Inside Handle; Interior Door Handle
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.3 x 3.2 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10434212
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2003 Chevrolet Monte Carlo Handle, Inside, Black, Driver Side
Part Number: 10434205
Product Specifications
- Other Name: Handle Assembly-Front Side Door Inside *Black; Interior Door Handle; Handle, Door Lock Inside Handle
- Position: Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.2 x 5.9 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10434205
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2003 Chevrolet Monte Carlo Handle, Inside, Driver Side
Part Number: 10434211
Product Specifications
- Other Name: Handle, Door Lock Inside Handle; Interior Door Handle
- Position: Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.1 x 5.7 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10434211
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2003 Chevrolet Monte Carlo Handle, Inside, Driver Side
Part Number: 10434213
Product Specifications
- Other Name: Handle, Door Lock Inside Handle; Interior Door Handle
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.1 x 2.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10434213
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2003 Chevrolet Monte Carlo Handle, Inside, Passenger Side
Part Number: 10434210
Product Specifications
- Other Name: Handle, Door Lock Inside Handle; Interior Door Handle
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.2 x 5.7 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10434210
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2003 Chevrolet Monte Carlo Door Handle

With a comprehensive array of OEM 2003 Chevrolet Monte Carlo Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Monte Carlo Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to replace the front outside door handle on 2003 Chevrolet Monte Carlo?
A: The first step in replacing a Monte Carlo front outside door handle is to make sure the window is completely raised while using two layers of masking tape to protect painted surfaces before beginning. The first step involves removing the front door trim panel followed by the water deflector along with the rear window channel bolt which paves the way to detach the rear window channel by gently pulling it down. Start by taking out the outside door handle rod-to-lock clip while detaching it from the lock cylinder. To access one of the outer door handle bolts you must first remove its hole plug followed by the handle itself and rod. The first step when installing consists of fitting the door handle rod and attaching the lock cylinder retainer clip to both components. Tighten the front outside door handle bolts on the door to reach 10 N.m (89 lb in). Put back the lock cylinder then install a fresh outside handle rod-to-lock clip where you eliminate all free movement of the rod. Position the clip cover over the threaded rod before reinstalling the rear window channel while making sure the up clip locks into place followed by securing it with the bolt that should be tightened to 10 N.m force (89 lb in). Reattach the access hole plug with the water deflector and the trim panel in the end.