How to replace the fuel pressure sensor on 2004 Buick LeSabre?

The first steps to change the Fuel Tank Pressure Sensor involve the removal of rear compartment floor trim and fuel sender access panel bolts then the access panel itself. Unplug the electronic connection from the fuel tank pressure (FTP) sensor then take out the FTP sensor. Start by mounting the FTP sensor then connect its electrical wire. Secure the fuel sender access panel maintenance for replacement by adhering to the Fastener Notice in Service Precautions and tightening its bolts to 2 N.m (18 lb in). You must reinstall the rear compartment floor trim at the end of the installation.

OEM 2004 Buick LeSabre Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Sensor found

View related parts
2004 Buick LeSabre Fuel Pressure Regulator, Passenger Side
Part Number: 16238399
Product Specifications
- Other Name: Sensor, Fuel Tank Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Pressure Regulator; Sensor, Early Fuel Evaporation; Fuel Gauge Sending Unit; Tank Pressure Sensor
- Position: Passenger Side
- Replaces: 12206740, 16217059, 16257276, 22678829, 09377680, 12219388, 16196060, 9377680
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.3 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16238399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2004 Buick LeSabre Fuel Pressure Sensor

With a comprehensive array of OEM 2004 Buick LeSabre Fuel Pressure Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick LeSabre Fuel Pressure Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Buick LeSabre Fuel Pressure Sensor Parts Questions & Experts Answers

Q: How to replace the fuel pressure sensor on 2004 Buick LeSabre?
A: The first steps to change the Fuel Tank Pressure Sensor involve the removal of rear compartment floor trim and fuel sender access panel bolts then the access panel itself. Unplug the electronic connection from the fuel tank pressure (FTP) sensor then take out the FTP sensor. Start by mounting the FTP sensor then connect its electrical wire. Secure the fuel sender access panel maintenance for replacement by adhering to the Fastener Notice in Service Precautions and tightening its bolts to 2 N.m (18 lb in). You must reinstall the rear compartment floor trim at the end of the installation.