How to Replace a Power Steering Hose for Pressure Hose on 2004 Buick Regal?

The first step to replace the power steering pressure hose requires placing a drain pan underneath the vehicle and then removing the accessory Drive Belt. Begin by supporting the vehicle and then removing both tire and wheel assembly. The power steering pressure hose should be detached from both the power steering gear at its lower section as well as from the Power Steering Pump followed by removing clamps on the power steering gear until the hose can be extracted from the vehicle. To install the new power steering pressure hose start by connecting it first to the vehicle and clamping it to power steering gear fittings then route it to the Power Steering Pump for attachment. Secure the hose fittings with torque to 27 n.m (20 lb ft) before connecting both ends of the hose to the power steering gear and the pressure hose fitting to this torque setting. First replace the tire and wheel and then discard the drain pan afterward lowering the vehicle while putting the accessory Drive Belt back in place. The system requires power steering fluid for filling before performing a bleed procedure and conducting leak inspections.

OEM 2004 Buick Regal Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Power Steering Hoses found

View related parts
2004 Buick Regal Pipe Kit, Passenger Side
Part Number: 26055484
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Fluid Pipe; Line Kit; Tube; Pipe
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.7 x 18.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26055484
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
2004 Buick Regal Power Steering Pressure Hose
Part Number: 26064185
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Item Weight: 1.80 Pounds
- Item Dimensions: 44.6 x 9.7 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26064185
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Regal Submodels:
- GS, LS | 6 Cyl 3.8 L GAS
View related parts
2004 Buick Regal Pipe Kit, Driver Side
Part Number: 26065126
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Fluid Pipe; Line Kit; Tube; Pipe
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.0 x 10.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26065126
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
2004 Buick Regal Return Line
Part Number: 10334985
Product Specifications
- Other Name: Pipe, Steering Fluid Cooler; Power Steering Hose; Return Tube
- Item Weight: 1.30 Pounds
- Item Dimensions: 25.9 x 12.2 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10334985
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Regal Submodels:
- GS, LS | 6 Cyl 3.8 L GAS

2004 Buick Regal Power Steering Hose

With a comprehensive array of OEM 2004 Buick Regal Power Steering Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick Regal Power Steering Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Buick Regal Parts Questions & Experts Answers

Q: How to Replace a Power Steering Hose for Pressure Hose on 2004 Buick Regal?
A: The first step to replace the power steering pressure hose requires placing a drain pan underneath the vehicle and then removing the accessory Drive Belt. Begin by supporting the vehicle and then removing both tire and wheel assembly. The power steering pressure hose should be detached from both the power steering gear at its lower section as well as from the Power Steering Pump followed by removing clamps on the power steering gear until the hose can be extracted from the vehicle. To install the new power steering pressure hose start by connecting it first to the vehicle and clamping it to power steering gear fittings then route it to the Power Steering Pump for attachment. Secure the hose fittings with torque to 27 n.m (20 lb ft) before connecting both ends of the hose to the power steering gear and the pressure hose fitting to this torque setting. First replace the tire and wheel and then discard the drain pan afterward lowering the vehicle while putting the accessory Drive Belt back in place. The system requires power steering fluid for filling before performing a bleed procedure and conducting leak inspections.