How to replace the front Seat Heater Switch on 2004 Buick Regal?

The first step is to press and lift the clips on each side of the center console switch and take it out. Take off the electrical connector from the accurate heated seat switch, with the natural one connected to the driver's switch and the black connector to the passenger's switch. After that, take out the heated seat switch from the assembly. While installing, put the heated seat switch into the switch assembly and link the wires so that the driver switch gets the natural connector and the passenger switch gets the black connector. After that, make sure the switch assembly fits against the console trim plate and snap it in to hold it in place.

OEM 2004 Buick Regal Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Seat Heater Switch found

View related parts
2004 Buick Regal Control Switch
Part Number: 10299847
Product Specifications
- Other Name: Switch, Electronic Brake Control; Seat Heater Switch; Tract Control Switch; Switch; Switch, Front/Rear Seat Heater
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.2 x 3.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10299847
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Regal Submodels:
- GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS

2004 Buick Regal Seat Heater Switch

With a comprehensive array of OEM 2004 Buick Regal Seat Heater Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick Regal Seat Heater Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Buick Regal Parts Questions & Experts Answers

Q: How to replace the front Seat Heater Switch on 2004 Buick Regal?
A: The first step is to press and lift the clips on each side of the center console switch and take it out. Take off the electrical connector from the accurate heated seat switch, with the natural one connected to the driver's switch and the black connector to the passenger's switch. After that, take out the heated seat switch from the assembly. While installing, put the heated seat switch into the switch assembly and link the wires so that the driver switch gets the natural connector and the passenger switch gets the black connector. After that, make sure the switch assembly fits against the console trim plate and snap it in to hold it in place.