Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2004 Buick Regal Thermostat

Engine Coolant Thermostat
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

  • 2004 Buick Regal Thermostat - 24505924
    2004 Buick Regal Thermostat Diagram - 24505924
    View related parts

    2004 Buick Regal Thermostat Unit

    Part Number: 24505924
    Product Specifications
    • Other Name: Thermostat Assembly-Engine Coolant (W/Gasket); Thermostat; Thermostat, Engine Coolant Temperature
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 3.3 x 2.2 x 2.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 24505924
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2004 Buick Regal Submodels:
    • 25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition | 6 Cyl 3.8 L GAS

2004 Buick Regal Thermostat

With a comprehensive array of OEM 2004 Buick Regal Thermostat, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick Regal Thermostat are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Buick Regal Thermostat Parts Questions & Experts Answers

  • Q: How to replace the thermostat on 2004 Buick Regal?
    A: Begin Thermostat replacement by removing the fuel injector sight shield followed by partially draining the cooling system. Skillfully reposition the hose clamp using hose clamp pliers (J 38185) at the water outlet housing before removing the radiator inlet hose from this housing. Start by taking out the water outlet housing bolt and stud before removing the water outlet housing with its gasket. Remove the Thermostat and clean all surfaces where the water outlet housing gaskets mate. The installation process begins with Thermostat placement followed by gasket fitting then water outlet housing insertion. Tighten the water outlet housing bolt and the stud to 27 nm torque (20 ft. Lbs.). Screw back the radiator inlet hose onto the water outlet housing before securing the hose clamp into position with hose clamp pliers (J 38185). After filling the cooling system, install the fuel injector sight shield.

Related 2004 Buick Regal Parts

Alternate Year Models

+
2003 Buick Regal Thermostat