How to replace the Automatic Transmission Shifter lever on 2004 Cadillac DeVille?

The first step to replace an automatic transmission shift lever requires sir system deactivation. Use sliding motion to move the shift lever seal upward through the shift lever. And if needed, remove each steering column trim covering. Separate the shift lever connector working at the column base before you take off the shift lever screw from the shift lever assembly. First pull out the shift lever along with its seal from the linear shift assembly but make sure you extract the shift lever seal by pushing it down towards the narrow segment of the shift lever. Put the shift lever seal on the minimal end of the shift lever before joining the shift lever assembly to the linear shift assembly. The installation of shift lever screw into the shift lever assembly requires a tightening force of 1.5 nm (13 in. Lbs.). Move the shift lever seal down the shift lever assembly until it matches the position of the steering column trim covers. The sir system should be activated only after reattaching steering column trim covers.

OEM 2004 Cadillac DeVille Automatic Transmission Shifter

AT Shifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Automatic Transmission Shifters found

View related parts
2004 Cadillac DeVille Gear Shift Assembly Part Number: 25736472
Product Specifications
- Other Name: Control Assembly-Automatic Transmission; Automatic Transmission Selector Handle; Shift Lever; Shifter; Control, Transmission Shift Control Lever; Control, Transmission Shift
- Replaces: 25667203
- Item Weight: 4.20 Pounds
- Item Dimensions: 17.7 x 12.7 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25736472
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2004 Cadillac DeVille Shift Lever Part Number: 26092330
Product Specifications
- Other Name: Lever Assembly, Automatic Transmission Control; Automatic Transmission Selector Handle; Gear Shift Assembly; Lever, Transmission Control Lever
- Item Weight: 1.20 Pounds
- Item Dimensions: 10.1 x 6.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26092330
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2004 Cadillac DeVille Shift Actuator Part Number: 15884352
$217.43 MSRP: $325.00
You Save: $107.57 (34%)
Product Specifications
- Other Name: Control, Transmission Shift; Control Assembly; Lock Assembly; Controller; Control, Transmission Shift Control Lever
- Replaces: 26051958
- Item Weight: 2.30 Pounds
- Item Dimensions: 12.1 x 3.9 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15884352
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS

2004 Cadillac DeVille Automatic Transmission Shifter

With a comprehensive array of OEM 2004 Cadillac DeVille Automatic Transmission Shifter, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Cadillac DeVille Automatic Transmission Shifter are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Cadillac DeVille Automatic Transmission Shifter Parts and Q&A

Q: How to replace the Automatic Transmission Shifter lever on 2004 Cadillac DeVille?
A: The first step to replace an automatic transmission shift lever requires sir system deactivation. Use sliding motion to move the shift lever seal upward through the shift lever. And if needed, remove each steering column trim covering. Separate the shift lever connector working at the column base before you take off the shift lever screw from the shift lever assembly. First pull out the shift lever along with its seal from the linear shift assembly but make sure you extract the shift lever seal by pushing it down towards the narrow segment of the shift lever. Put the shift lever seal on the minimal end of the shift lever before joining the shift lever assembly to the linear shift assembly. The installation of shift lever screw into the shift lever assembly requires a tightening force of 1.5 nm (13 in. Lbs.). Move the shift lever seal down the shift lever assembly until it matches the position of the steering column trim covers. The sir system should be activated only after reattaching steering column trim covers.