OEM 2004 Cadillac Seville Center Console

2004 Cadillac Seville Parts Questions & Experts Answers

• Q: How to Replace the Center Console Without UV8 on 2004 Cadillac Seville?

  A: The first step for console replacement without uv8 is the sir disablement. Start by applying the parking brake then discard any cd changer or storage bins before proceeding. Start by removing the console trim plate followed by uninstalling both left and right console trim panels. First disconnect both the shifter cable and park lock cable from their attachment to the shifter assembly. Start the console Center Console floor replacement by removing the storage bin floor cover then disconnecting electrical connectors 1, 2, and 3. You must move both front seats to the rear for access to remove 2 fasteners that secure metal bracket arms to both floor surfaces and the 2 nuts holding the console in place to the Floor Pan as well as the 2 fasteners connecting the console to the bottom instrument panel (I/P). Avoid allowing metal brackets to damage your seats. Pull the Center Console rearward by its rear end to extract it from the vehicle. Position the console assembly on the floor and complete electrical connection before aligning the console's front edges with the lower i/p and inserting the rear studs. Tighten 2 Center Console fasteners against the lower instrument panel to 2 n.m (18 lb in) before installing 2 nuts on floor studs inside the Center Console compartment with 10 n.m (89 lb in) torque settings. Screw the fasteners through metal bracket arms on each console side followed by connector reconnection (1,2,3) and fastener tightening to 10 n.m (89 lb in). Apply the storage cover to the floor beneath the bin before installing the park lock cable followed by Shift Cable to the selector. Complete the installation by adding the console panels and trim plate and enable the sir while also including storage bins or a cd changer when appropriate.