OEM 2004 Cadillac Seville Fuel Filler Hose

2004 Cadillac Seville Fuel Filler Hose Parts and Q&A

• Q: How to Replace a Fuel Filler Hose on 2004 Cadillac Seville?

  A: It is essential to drain the Fuel Tank until it sits under the Fuel Filler Hose before starting Fuel Filler Hose replacement. Raise the vehicle afterward you should take off the wheel house filler pipe opening cover. The procedure to remove the fuel filler pipe begins by removing the Fuel Tank filler pipe ground wire bolt then the fuel filler pipe clamp before capturing the fuel filler pipe. Installation begins with placing the fuel filler pipe in its position while following all service precautions stated in fastener notices. You should fasten the fuel filler pipe clamp until it reaches 4.2 nm (37 lb in) of tightness. Secure the attaching bolt of the Fuel Tank filler pipe ground wire with a torque of 9 nm (80 lb in). The wheel house filler pipe opening needs its cover replaced before lowering the vehicle down for fuel addition to the tank. Place the Fuel Tank filler pipe cap while attaching the negative Battery Cable. The procedure for leak detection begins with turning on ignition while engine remains off for two seconds followed by ignition off for ten seconds and ends with another ignition on and engine off sequence for leak inspection. Install the fuel injector sight shield to complete the task.