OEM 2004 Cadillac Seville Throttle Cable

2004 Cadillac Seville Throttle Cable Parts Questions & Experts Answers

• Q: How to replace the throttle cable on 2004 Cadillac Seville?

  A: The first step for changing this cable is disconnecting it from the throttle body lever and the Throttle Cable bracket. The installation procedure begins by disconnecting the Throttle Cable at both its retaining points on the bulkhead followed by removal of the left closeout insulator panel. Push the cable through the bulkhead after squeezing the Throttle Cable cover tangs. Then remove the cable by disconnecting the control from both the throttle pedal and the retainer. Installation procedures require avoidance of routing flexible components within a 50 mm (2 in) distance from moving parts. The first step when installing the Throttle Cable involves placing it onto the throttle body lever while guiding it into the lever groove for complete seatability. Route the cable over the Brake Master Cylinder through the bulkhead while securing it at the retainer. Install the cable at the Throttle Cable bracket before the installation process. Install the cable at the throttle pedal then verify full throttle positions by operating the pedal and make sure to reinstall the left closeout insulator panel after performing a binding check between closed throttle and wide open throttle.