ChevyParts
My Garage
My Account
Cart
OEM 2004 Cadillac SRX Shock Absorber
Suspension Shock Absorber- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Shock Absorbers found
2004 Cadillac SRX Shock Absorber
Part Number: 19302764$383.52 MSRP: $1049.84You Save: $666.32 (64%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Absorber, Front And Rear Suspension; Shock
- Position: Rear Upper
- Replaces: 15210815, 15145221, 89047641
- Item Weight: 9.80 Pounds
- Item Dimensions: 6.3 x 6.2 x 29.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19302764
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2004 Cadillac SRX Shock Absorber, Rear Upper
Part Number: 21992495$339.62 MSRP: $659.14You Save: $319.52 (49%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock; Absorber, Front And Rear Suspension
- Position: Rear Upper
- Item Weight: 10.20 Pounds
- Item Dimensions: 33.8 x 6.7 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 21992495
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Absorber Kit, Front Shock; Strut; Absorber Kit, Front And Rear Suspension
- Position: Front
- Item Weight: 3.70 Pounds
- Item Dimensions: 27.4 x 8.0 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88957129
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Absorber Kit, Front Shock; Strut; Absorber Kit, Front And Rear Suspension
- Position: Front
- Replaces: 19150593, 88955523
- Item Weight: 2.50 Pounds
- Item Dimensions: 28.3 x 6.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19300030
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2004 Cadillac SRX Shock Absorber
With a comprehensive array of OEM 2004 Cadillac SRX Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Cadillac SRX Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2004 Cadillac SRX Parts Questions & Experts Answers
- Q: How to Replace a Shock Absorber Module on 2004 Cadillac SRX?A: First support the raised vehicle then remove the tire and wheel and next take off the shock yoke before changing the shock module. Where magnaride exists disconnect the sensor link attached to the upper Control Arm while in addition disconnect the headlamp sensors from the system. It is essential to stop the ball stud from rotating during assembly or disassembly tasks because air tools might lead to component damage but hand tools will protect the ball stud from unwanted movement. An appropriate hex-head tool allows maintenance of the upper Control Arm-to-steering knuckle nut retention as you keep the upper Control Arm positioned against the Steering Knuckle. Loosen the Control Arm-to-steering knuckle nut and then separate the arm from the knuckle before lowering the vehicle. Vehicle owners should first disconnect the shock module sensor electrical connector before removing the upper mounting bolts on the shock module and extracting it from the vehicle when working on magnaride vehicles. The new shock module requires installation in the vehicle so position it properly before tightening the upper mounting bolts to 112 nm (83 ft. Lbs.). The sensor installation process requires reattaching its electrical connector for vehicles with magnaride before lifting the vehicle up again. Screw down the upper Control Arm onto the Steering Knuckle using the retaining nut which should be tightened to 20 nm (18 ft. Lbs.) followed by 210 degrees of additional turn. Vehicles with magnaride and headlamp sensors require connecting the upper Control Arm sensor links in their proper locations. To complete the installation you need to install the shock yoke first then attach the shock to it and finally reinstall the tire along with wheel and drop the vehicle.
Related 2004 Cadillac SRX Parts
2004 Cadillac SRX Wheel Hub
2004 Cadillac SRX Coil Spring Insulator
2004 Cadillac SRX Coil Springs
2004 Cadillac SRX Control Arm Bolt
2004 Cadillac SRX Control Arm Bracket
2004 Cadillac SRX Lateral Link
2004 Cadillac SRX Ride Height Sensor
2004 Cadillac SRX Steering Knuckle
2004 Cadillac SRX Sway Bar Bracket
2004 Cadillac SRX Sway Bar Bushing
2004 Cadillac SRX Sway Bar Link
2004 Cadillac SRX Trailing Arm