Make sure this part fits

GM 19300030
Shock Absorber, Front

2004-2009 GM

Customer Questions & Expert Answers (9)
GM 19300030 Shock Absorber, Front
  • Part Description
    Absorber Kit, Front Shock
  • Position
    Front
  • Replaces
    19150593, 88955523
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19300030
    Part DescriptionAbsorber Kit, Front Shock
    Other NamesStrut; Absorber Kit, Front And Rear Suspension
    Item Dimensions28.3 x 6.1 x 6.1 inches
    Item Weight2.50 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces19150593, 88955523
    Require Quantity2
    ManufacturerGeneral Motors
    SKU19300030
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005 Cadillac STSBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 19300030 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19300030 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the shock module be prepared for installation for the 2008 Cadillac SRX? Posted by Customer
    A:
    Install the shock module into the spring compressor and mark the upper control arm assembly and insulator for proper installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the first step to replace the shock module for the 2004 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel, followed by the shock yoke.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the final step after reinstalling the shock module for the 2009 Cadillac SRX? Posted by Customer
    A:
    Reinstall the tire and wheel before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    Where should the second indentation be made on the shock absorber tube for the 2006 Cadillac SRX? Posted by Customer
    A:
    The second indentation should be made 25 mm (1.0 inch) from the bottom of the tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the installation process for the new shock for the 2005 Cadillac SRX? Posted by Customer
    A:
    Place the new shock onto the vehicle and install the lower shock mounting bolt, tightening it to 150 Nm (111 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the next step after raising and supporting for the 2005 Cadillac STS? Posted by Customer
    A:
    Disconnect the automatic level control from the shock by twisting the retaining clip and pulling the connector from the shock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should the shock absorber be positioned for drilling for the 2009 Cadillac SRX? Posted by Customer
    A:
    The shock absorber should be clamped in a vise horizontally with the shock absorber rod completely extended.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done while lowering for the 2007 Cadillac SRX? Posted by Customer
    A:
    Guide the shock to the body and then install the upper shock mounting nuts, tightening them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19300030, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19300030 Shock Absorber, Front. It is sometimes referred to as GM Shock Absorber. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19300030 Shock Absorber, Front. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery