How to replace the brake master cylinder on 2004 Chevrolet Aveo?

To start work on the Brake Master Cylinder replacement you need to detach the electrical connector from its location on the reservoir. When working with abs braking systems disconnect the brake lines from the master cylinder while non-abs systems need Brake Line disconnection from proportioning valves. To replace the Brake Master Cylinder on vehicles that use a manual transaxle system you must open the connector clip at its clutch hose connection to the master cylinder. Block brake lines before unscrewing the booster power unit to stop fluid from leaking during the master cylinder removal process. Take out the brake fluid seal from the booster housing before removing the fluid. To install the new master cylinder use fresh nuts and place the new seal at the booster housing before tightening the cylinder nuts to 18 nm (13 ft. Lbs.). For abs cars join the brake lines to the cylinder body while non-abs cars join them to the proportioning valves and tighten them to 16 nm (12 ft. Lbs.). Use the clutch hose connection for manual transaxle vehicles to reattach the clip while linking the electrical connector to the reservoir. Fill brake fluid into the system, test for leaks while adding and checking fluid again before doing Brake Line maintenance.

OEM 2004 Chevrolet Aveo Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Master Cylinders found

View related parts
2004 Chevrolet Aveo Booster Assembly Part Number: 96534593
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Booster
- Item Weight: 8.00 Pounds
- Item Dimensions: 17.0 x 13.9 x 13.3 inches
- Condition: New
- SKU: 96534593
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS | 4 Cyl 1.6 L GAS
View related parts
2004 Chevrolet Aveo Master Cylinder Part Number: 93742398
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Item Weight: 1.80 Pounds
- Item Dimensions: 11.8 x 8.8 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 93742398
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2004 Chevrolet Aveo Master Cylinder Part Number: 93742290
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Item Weight: 2.00 Pounds
- Item Dimensions: 12.0 x 9.5 x 5.5 inches
- Condition: New
- SKU: 93742290
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2004 Chevrolet Aveo Master Cylinder Part Number: 93742399
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Item Weight: 1.70 Pounds
- Item Dimensions: 11.4 x 8.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 93742399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2004 Chevrolet Aveo Booster Assembly Part Number: 96534620
Product Specifications
- Other Name: Cylinder; Brake Booster
- Item Weight: 9.10 Pounds
- Condition: New
- SKU: 96534620
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS | 4 Cyl 1.6 L GAS
View related parts
2004 Chevrolet Aveo Booster Assembly Part Number: 96457292
Product Specifications
- Other Name: Cylinder; Brake Booster
- Item Weight: 8.50 Pounds
- Condition: New
- SKU: 96457292
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS | 4 Cyl 1.6 L GAS
View related parts
2004 Chevrolet Aveo Booster Assembly Part Number: 96470257
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Booster
- Item Weight: 9.20 Pounds
- Item Dimensions: 13.6 x 13.3 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96470257
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS | 4 Cyl 1.6 L GAS
View related parts
2004 Chevrolet Aveo Master Cylinder Part Number: 93742291
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Item Weight: 2.00 Pounds
- Item Dimensions: 13.0 x 9.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 93742291
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2004 Chevrolet Aveo Brake Master Cylinder

With a comprehensive array of OEM 2004 Chevrolet Aveo Brake Master Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Aveo Brake Master Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Aveo Brake Master Cylinder Parts and Q&A

Q: How to replace the brake master cylinder on 2004 Chevrolet Aveo?
A: To start work on the Brake Master Cylinder replacement you need to detach the electrical connector from its location on the reservoir. When working with abs braking systems disconnect the brake lines from the master cylinder while non-abs systems need Brake Line disconnection from proportioning valves. To replace the Brake Master Cylinder on vehicles that use a manual transaxle system you must open the connector clip at its clutch hose connection to the master cylinder. Block brake lines before unscrewing the booster power unit to stop fluid from leaking during the master cylinder removal process. Take out the brake fluid seal from the booster housing before removing the fluid. To install the new master cylinder use fresh nuts and place the new seal at the booster housing before tightening the cylinder nuts to 18 nm (13 ft. Lbs.). For abs cars join the brake lines to the cylinder body while non-abs cars join them to the proportioning valves and tighten them to 16 nm (12 ft. Lbs.). Use the clutch hose connection for manual transaxle vehicles to reattach the clip while linking the electrical connector to the reservoir. Fill brake fluid into the system, test for leaks while adding and checking fluid again before doing Brake Line maintenance.