How to replace the clutch shaft pilot bearing in the front drive axle on 2004 Chevrolet Blazer?

The process of clutch shaft Pilot Bearing replacement in front drive axles starts by removing both inner axle shafts and housing assembly and then disassembling the clutch shaft from differential carrier assembly. The Pilot Bearing remover (J34011) extraction tool should be used to remove the clutch shaft Pilot Bearing. Apply necessary axle lubricant to the new bearing before inserting it through the Pilot Bearing installer (J33842). The procedure ends with reassembly which includes placing the clutch shaft inside the differential carrier assembly followed by installation of the inner Axle Shaft and housing assembly.

OEM 2004 Chevrolet Blazer Pilot Bearing

Clutch Pilot Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Pilot Bearing found

View related parts
2004 Chevrolet Blazer Pilot Bearing Part Number: 12557583
$13.66 MSRP: $25.68
You Save: $12.02 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing-Clutch Pilot; Pilot Bearings; Bearing, Engine Crankshaft Clutch Pilot
- Replaces: 12479894
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 2.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12557583
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Blazer Submodels:
- Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS

2004 Chevrolet Blazer Pilot Bearing

With a comprehensive array of OEM 2004 Chevrolet Blazer Pilot Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Blazer Pilot Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Blazer Pilot Bearing Parts and Q&A

Q: How to replace the clutch shaft pilot bearing in the front drive axle on 2004 Chevrolet Blazer?
A: The process of clutch shaft Pilot Bearing replacement in front drive axles starts by removing both inner axle shafts and housing assembly and then disassembling the clutch shaft from differential carrier assembly. The Pilot Bearing remover (J34011) extraction tool should be used to remove the clutch shaft Pilot Bearing. Apply necessary axle lubricant to the new bearing before inserting it through the Pilot Bearing installer (J33842). The procedure ends with reassembly which includes placing the clutch shaft inside the differential carrier assembly followed by installation of the inner Axle Shaft and housing assembly.