ChevyParts
My Garage
My Account
Cart
OEM 2004 Chevrolet Corvette Coolant Reservoir
Coolant Tank Reservoir- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Coolant Reservoirs found
2004 Chevrolet Corvette Tank
Part Number: 52477361$27.04 MSRP: $49.00You Save: $21.96 (45%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Tank Assembly, Radiator Outlet; Coolant Reservoir; Tank, Radiator
- Item Weight: 1.50 Pounds
- Item Dimensions: 21.8 x 5.1 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52477361
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2004 Chevrolet Corvette Reservoir Tank
Part Number: 10430189$98.76 MSRP: $146.96You Save: $48.20 (33%)Product Specifications- Other Name: Container, Heater Coolant Tank; Coolant Reservoir; Reservoir; Tank, Engine Coolant Recovery
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.4 x 8.2 x 17.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10430189
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Tank, Radiator; Coolant Reservoir
- Item Weight: 1.20 Pounds
- Item Dimensions: 20.8 x 5.1 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52477360
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2004 Chevrolet Corvette Coolant Reservoir
With a comprehensive array of OEM 2004 Chevrolet Corvette Coolant Reservoir, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Corvette Coolant Reservoir are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2004 Chevrolet Corvette Coolant Reservoir Parts Questions & Experts Answers
- Q: How to replace the coolant reservoir on 2004 Chevrolet Corvette?A: Draining the cooling system must occur before removing the surge tank nuts and side nut. First remove the surge tank hose from its clamp at the tank inlet followed by removing the hose itself. Secondly the technician screws down and removes the surge tank outlet hose clamp followed by unclamping the outlet hose. Before removing the surge tank proceed to relocate the heater outlet hose clamp then remove the heater outlet hose from the surge tank. Clean coolant should be used for lubricating the hoses before you install the surge tank followed by the heater outlet hose. Finally, replace and secure the heater outlet hose clamp. Begin the installation by putting in the surge tank inlet hose then moving the clamp into position followed by setup of the surge tank outlet hose along with its clamp. Check that the front stud extends entirely into the slot before installing the surge tank to its mounting studs. Start by lubricating the surge tank upper nuts before you apply the following tightening sequence: lower first, then top rear and finally top front. Make sure to tighten all three radiator surge tank nuts to 10 Nm (89 inch lbs.) while starting from the bottom and moving to the rear and front top positions. Finally, fill the cooling system.
Related 2004 Chevrolet Corvette Parts
2004 Chevrolet Corvette A/C Condenser Fan
2004 Chevrolet Corvette Coolant Pipe
2004 Chevrolet Corvette Coolant Reservoir Cap
2004 Chevrolet Corvette Cooling Hose
2004 Chevrolet Corvette Fan Blade
2004 Chevrolet Corvette Fan Motor
2004 Chevrolet Corvette Fan Shroud
2004 Chevrolet Corvette Radiator
2004 Chevrolet Corvette Radiator Hose
2004 Chevrolet Corvette Radiator fan
2004 Chevrolet Corvette Water Pump
2004 Chevrolet Corvette Water Pump Gasket