How to replace the lower control arm bushings on 2004 Chevrolet Impala?

Begin by uninstalling the lower Control Arm and maintaining it in a vise for repairs. Secure the puller bolt through a 1/2 x 20 in standard thread nut before continuing. You should assemble the bushing removal tools consisting of a nut and a Control Arm Bushing service set (J21474-01) washer and a j21474-01 bearing followed by a Control Arm Bushing receiver (J21474-5) and a j21474-01 puller bolt. Begin by tightening the puller bolt to remove the bushing. Proceed with disassembly of the j21474-01 and j21474-5. To install the new bushing you should first apply a lubricant using liquid hand soap or similar product before tightening a 1/2 x 20 in standard thread nut onto the puller bolt. Use the assembly tools which comprise of j21474-01 bearing together with j21474-01 washer and j21474-01 bearing along with j21474-5 and j21474-01 puller bolt. After installing the bushing into the Control Arm use the puller bolt to reach proper torque then separate the j21474-01 from j21474-5 followed by removing the Control Arm from the clamp and concluding with new lower Control Arm installation.

OEM 2004 Chevrolet Impala Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Control Arm Bushings found

View related parts
2004 Chevrolet Impala Lower Control Arm Bushing, Front
Part Number: 10403698
$18.15 MSRP: $29.88
You Save: $11.73 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Front Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Replaces: 10412685, 10441232, 10294083
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.4 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10403698
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2004 Chevrolet Impala Lower Control Arm Bushing, Front
Part Number: 10260991
$15.09 MSRP: $24.69
You Save: $9.60 (39%)
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Rear Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Replaces: 10264395
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.0 x 2.6 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10260991
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2004 Chevrolet Impala Control Arm Bushing

With a comprehensive array of OEM 2004 Chevrolet Impala Control Arm Bushing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Impala Control Arm Bushing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Impala Parts Questions & Experts Answers

Q: How to replace the lower control arm bushings on 2004 Chevrolet Impala?
A: Begin by uninstalling the lower Control Arm and maintaining it in a vise for repairs. Secure the puller bolt through a 1/2 x 20 in standard thread nut before continuing. You should assemble the bushing removal tools consisting of a nut and a Control Arm Bushing service set (J21474-01) washer and a j21474-01 bearing followed by a Control Arm Bushing receiver (J21474-5) and a j21474-01 puller bolt. Begin by tightening the puller bolt to remove the bushing. Proceed with disassembly of the j21474-01 and j21474-5. To install the new bushing you should first apply a lubricant using liquid hand soap or similar product before tightening a 1/2 x 20 in standard thread nut onto the puller bolt. Use the assembly tools which comprise of j21474-01 bearing together with j21474-01 washer and j21474-01 bearing along with j21474-5 and j21474-01 puller bolt. After installing the bushing into the Control Arm use the puller bolt to reach proper torque then separate the j21474-01 from j21474-5 followed by removing the Control Arm from the clamp and concluding with new lower Control Arm installation.