How to replace the rear Brake Disc on dual wheels on 2004 Chevrolet Silverado 1500?

The procedure for replacing rear brake rotors in dual-wheeled vehicles starts by releasing the park brake and raising and supporting the vehicle. First remove the wheel and tire components before disconnecting the rotor and hub while noting their original position. Place the hub and rotor assembly onto a hydraulic press machine to extract the wheel studs from their position. Installation starts with hub and rotor alignment followed by stud insertion while adding four washers before tightening a lug nut whose flat side points at the washers. Apply torque to the lug nut while holding the stud in position to push it toward both the rotor and hub assembly until it reaches full seating. Then remove the lug nut and washers. After the hub and rotor assembly installation on the vehicle the tire and wheel assembly gets mounted before lowering the vehicle down. Step by step brake pedal application should be performed when the engine is off while braking the pedal to 2/3 of its range before releasing it slowly. Use this procedure multiple times by waiting 15 seconds during each cycle to achieve a steady brake pedal so the caliper pistons and pads become properly installed. The procedure ends with the addition of clean brake fluid in the master cylinder reservoir up to its correct level.

OEM 2004 Chevrolet Silverado 1500 Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Discs found

View related parts
2004 Chevrolet Silverado 1500 Rotor
Part Number: 15712803
$131.08 MSRP: $250.60
You Save: $119.52 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Item Weight: 30.00 Pounds
- Item Dimensions: 16.5 x 17.0 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15712803
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Silverado 1500 Submodels:
- Base, LS, LT, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2004 Chevrolet Silverado 1500 Rotor
Part Number: 15712801
$96.36 MSRP: $180.93
You Save: $84.57 (47%)
ADD TO CART
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Item Weight: 13.40 Pounds
- Item Dimensions: 15.9 x 16.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15712801
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Silverado 1500 Submodels:
- Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2004 Chevrolet Silverado 1500 Rotor, Front
Part Number: 15942195
$152.90 MSRP: $296.76
You Save: $143.86 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 15718986, 18060215
- Item Weight: 27.20 Pounds
- Item Dimensions: 13.6 x 14.0 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15942195
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Silverado 1500 Submodels:
- Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2004 Chevrolet Silverado 1500 Rotor, Front
Part Number: 19210603
$94.27 MSRP: $182.96
You Save: $88.69 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 18060214
- Item Weight: 20.40 Pounds
- Item Dimensions: 13.4 x 13.0 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19210603
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Silverado 1500 Submodels:
- Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2004 Chevrolet Silverado 1500 Rotor
Part Number: 19211496
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Replaces: 15712800
- Item Weight: 18.40 Pounds
- Item Dimensions: 16.2 x 16.1 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19211496
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Silverado 1500 Submodels:
- Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2004 Chevrolet Silverado 1500 Brake Disc

With a comprehensive array of OEM 2004 Chevrolet Silverado 1500 Brake Disc, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Silverado 1500 Brake Disc are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Silverado 1500 Parts Questions & Experts Answers

Q: How to replace the rear Brake Disc on dual wheels on 2004 Chevrolet Silverado 1500?
A: The procedure for replacing rear brake rotors in dual-wheeled vehicles starts by releasing the park brake and raising and supporting the vehicle. First remove the wheel and tire components before disconnecting the rotor and hub while noting their original position. Place the hub and rotor assembly onto a hydraulic press machine to extract the wheel studs from their position. Installation starts with hub and rotor alignment followed by stud insertion while adding four washers before tightening a lug nut whose flat side points at the washers. Apply torque to the lug nut while holding the stud in position to push it toward both the rotor and hub assembly until it reaches full seating. Then remove the lug nut and washers. After the hub and rotor assembly installation on the vehicle the tire and wheel assembly gets mounted before lowering the vehicle down. Step by step brake pedal application should be performed when the engine is off while braking the pedal to 2/3 of its range before releasing it slowly. Use this procedure multiple times by waiting 15 seconds during each cycle to achieve a steady brake pedal so the caliper pistons and pads become properly installed. The procedure ends with the addition of clean brake fluid in the master cylinder reservoir up to its correct level.