How to replace the MAP Sensor on 2004 Chevrolet Tracker?

To replace the Manifold Absolute Pressure (MAP) sensor, you then disconnect the electrical connector from the MAP sensor, remove the 2 MAP sensor attaching bolts and take out the MAP sensor from the intake plenum. For installation, grease the seal of the MAP sensor vacuum port with the clean engine oil, and then go ahead to insert the MAP sensor into the intake plenum, tightening using the 2 bolts (3.5 N.m (30 lb in). Lastly, join the electrical connector to the MAP sensor.

OEM 2004 Chevrolet Tracker MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2004 Chevrolet Tracker Map Sensor
Part Number: 91176190
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor
- Item Weight: 4.30 Pounds
- Item Dimensions: 3.1 x 2.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91176190
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Tracker Submodels:
- Base, LT, ZR2 | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2004 Chevrolet Tracker MAP Sensor

With a comprehensive array of OEM 2004 Chevrolet Tracker MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Tracker MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Tracker Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2004 Chevrolet Tracker?
A: To replace the Manifold Absolute Pressure (MAP) sensor, you then disconnect the electrical connector from the MAP sensor, remove the 2 MAP sensor attaching bolts and take out the MAP sensor from the intake plenum. For installation, grease the seal of the MAP sensor vacuum port with the clean engine oil, and then go ahead to insert the MAP sensor into the intake plenum, tightening using the 2 bolts (3.5 N.m (30 lb in). Lastly, join the electrical connector to the MAP sensor.

Related 2004 Chevrolet Tracker Parts

Alternate Year Models

2003 Chevrolet Tracker MAP Sensor