How to replace the MAP Sensor on 2003 Chevrolet Tracker?

To replace Manifold Absolute Pressure (MAP) Sensor unplug the electrical connector from the MAP sensor. Next, take off the attaching bolts for 2 MAP sensors and pull off MAP sensors from the intake plenum. For the installation, lubricate the seal near the MAP sensor on the vacuum port with clean engine oil before placing the MAP sensor into the intake plenum and out fix it using the 2 bolts while tightening them to 3.5N.m 30 lb in. Finally, plug in the electrical connector to the MAP sensor.

OEM 2003 Chevrolet Tracker MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2003 Chevrolet Tracker Map Sensor Part Number: 91176190
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor
- Item Weight: 4.30 Pounds
- Item Dimensions: 3.1 x 2.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91176190
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Tracker Submodels:
- Base, LT, ZR2 | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2003 Chevrolet Tracker MAP Sensor

With a comprehensive array of OEM 2003 Chevrolet Tracker MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Tracker MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Tracker MAP Sensor Parts and Q&A

Q: How to replace the MAP Sensor on 2003 Chevrolet Tracker?
A: To replace Manifold Absolute Pressure (MAP) Sensor unplug the electrical connector from the MAP sensor. Next, take off the attaching bolts for 2 MAP sensors and pull off MAP sensors from the intake plenum. For the installation, lubricate the seal near the MAP sensor on the vacuum port with clean engine oil before placing the MAP sensor into the intake plenum and out fix it using the 2 bolts while tightening them to 3.5N.m 30 lb in. Finally, plug in the electrical connector to the MAP sensor.

Related 2003 Chevrolet Tracker Parts

Alternate Year Models

2002 Chevrolet Tracker MAP Sensor 2004 Chevrolet Tracker MAP Sensor