How to replace the MAP Sensor on Chevrolet Tracker?

To replace Manifold Absolute Pressure (MAP) Sensor unplug the electrical connector from the MAP sensor. Next, take off the attaching bolts for 2 MAP sensors and pull off MAP sensors from the intake plenum. For the installation, lubricate the seal near the MAP sensor on the vacuum port with clean engine oil before placing the MAP sensor into the intake plenum and out fix it using the 2 bolts while tightening them to 3.5N.m 30 lb in. Finally, plug in the electrical connector to the MAP sensor.

OEM Chevrolet Tracker MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 MAP Sensors found

View related parts
Chevrolet Tracker Map Sensor
Part Number: 91176190
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2004 Chevrolet Tracker | Base, LT, ZR2 | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Map Sensor
Part Number: 91174524
Product Specifications
- Other Name: Sensor, Computer Control Sensors
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker M.A.P. Sensor
Part Number: 30015905
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS

Chevrolet Tracker MAP Sensor

Our website offers an extensive catalog of genuine Chevrolet Tracker MAP Sensor at unbeatable prices. Every OEM Chevrolet Tracker MAP Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Tracker MAP Sensor Parts Questions & Experts Answers

Map Sensor
91176190
Q: How to replace the MAP Sensor on Chevrolet Tracker?
A: To replace Manifold Absolute Pressure (MAP) Sensor unplug the electrical connector from the MAP sensor. Next, take off the attaching bolts for 2 MAP sensors and pull off MAP sensors from the intake plenum. For the installation, lubricate the seal near the MAP sensor on the vacuum port with clean engine oil before placing the MAP sensor into the intake plenum and out fix it using the 2 bolts while tightening them to 3.5N.m 30 lb in. Finally, plug in the electrical connector to the MAP sensor.

Related Chevrolet Tracker Parts

Browse Chevrolet Tracker MAP Sensor by Years

2004 2003 2002 2001 2000 1999 1998