How to replace the MAP Sensor on 2001 Chevrolet Tracker?

To replace the Manifold Absolute Pressure (MAP) sensor, disconnect the electrical connector from the MAP sensor , remove the 2 MAP sensor attaching bolts and remove the MAP sensor from the intake plenum. For installation, Smear the seal on the MAP sensor vacuum port with clean engine oil before installing MAP sensor into the intake plenum. Fix the MAP sensor to the intake plenum using the 2 bolts , torque 3.5 N.m (30 lb in ). Finally, plug in the electrical connector to the MAP sensor.

OEM 2001 Chevrolet Tracker MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2001 Chevrolet Tracker Map Sensor
Part Number: 91174524
Product Specifications
- Other Name: Sensor, Computer Control Sensors
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91174524
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Tracker Submodels:
- Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2001 Chevrolet Tracker MAP Sensor

With a comprehensive array of OEM 2001 Chevrolet Tracker MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Tracker MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Tracker Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2001 Chevrolet Tracker?
A: To replace the Manifold Absolute Pressure (MAP) sensor, disconnect the electrical connector from the MAP sensor , remove the 2 MAP sensor attaching bolts and remove the MAP sensor from the intake plenum. For installation, Smear the seal on the MAP sensor vacuum port with clean engine oil before installing MAP sensor into the intake plenum. Fix the MAP sensor to the intake plenum using the 2 bolts , torque 3.5 N.m (30 lb in ). Finally, plug in the electrical connector to the MAP sensor.

Related 2001 Chevrolet Tracker Parts

Alternate Year Models

2000 Chevrolet Tracker MAP Sensor 2002 Chevrolet Tracker MAP Sensor