How to replace the Coolant Temperature Sensor on 2003 Chevrolet Tracker?

The first step to take in order to replace the Engine Coolant Temperature (ECT) Sensor is to drain the cooling system. Next, unplug ECT sensor plug and remove ECT sensor from the coolant housing. For installation, mount the ECT sensor at the coolant housing, making sure it is tightened up to 15 N.m (11 lb ft), in accordance to the, Component Fastener Tightening Notice Check that the sensor is installed and reconnect the ECT sensor electrical connector and fill the cooling system.

OEM 2003 Chevrolet Tracker Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2003 Chevrolet Tracker Coolant Temperature Sensor
Part Number: 91172375
Product Specifications
- Other Name: Sensor, Coolant Temperature (Engine Unit); Temperature Sensor; Temperature Sending Unit
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 2.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91172375
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Tracker Submodels:
- Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2003 Chevrolet Tracker Coolant Temperature Sensor

With a comprehensive array of OEM 2003 Chevrolet Tracker Coolant Temperature Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Tracker Coolant Temperature Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Tracker Parts Questions & Experts Answers

Q: How to replace the Coolant Temperature Sensor on 2003 Chevrolet Tracker?
A: The first step to take in order to replace the Engine Coolant Temperature (ECT) Sensor is to drain the cooling system. Next, unplug ECT sensor plug and remove ECT sensor from the coolant housing. For installation, mount the ECT sensor at the coolant housing, making sure it is tightened up to 15 N.m (11 lb ft), in accordance to the, Component Fastener Tightening Notice Check that the sensor is installed and reconnect the ECT sensor electrical connector and fill the cooling system.

Related 2003 Chevrolet Tracker Parts

Alternate Year Models

2002 Chevrolet Tracker Coolant Temperature Sensor 2004 Chevrolet Tracker Coolant Temperature Sensor