How to replace the Knock Sensor (KS) on 2004 Chevrolet Venture?

Before the replacement of a Knock Sensor (KS) you must turn OFF ignition power while elevating the automobile. Start by disconnecting the wiring harness connector from the knock sensor followed by removing the KS from its engine block position. The sensor threads on the KS are factory-coated without thread sealants so applying additional sealants will damage the sensor's detonation detection capability during installation. Put the Knock Sensor into the engine block and follow up by tightening it to 19 N.m (14 lb ft). After completing installation, connect the wiring harness connector to the knock sensor while lowering the vehicle.

OEM 2004 Chevrolet Venture Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2004 Chevrolet Venture Knock Sensor
Part Number: 10456238
$19.36 MSRP: $60.45
You Save: $41.09 (68%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 2.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456238
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2004 Chevrolet Venture Knock Sensor

With a comprehensive array of OEM 2004 Chevrolet Venture Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Venture Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Venture Parts Questions & Experts Answers

Q: How to replace the Knock Sensor (KS) on 2004 Chevrolet Venture?
A: Before the replacement of a Knock Sensor (KS) you must turn OFF ignition power while elevating the automobile. Start by disconnecting the wiring harness connector from the knock sensor followed by removing the KS from its engine block position. The sensor threads on the KS are factory-coated without thread sealants so applying additional sealants will damage the sensor's detonation detection capability during installation. Put the Knock Sensor into the engine block and follow up by tightening it to 19 N.m (14 lb ft). After completing installation, connect the wiring harness connector to the knock sensor while lowering the vehicle.

Related 2004 Chevrolet Venture Parts

Alternate Year Models

2003 Chevrolet Venture Knock Sensor 2005 Chevrolet Venture Knock Sensor