How to replace the Knock Sensor (KS) on 2005 Chevrolet Venture?

To replace the Knock Sensor (KS), one should raise the vehicle and turn OFF ignition. Pull off the wiring harness connector from the knock sensor and remove the KS from the engine block. When installing the KS, do not use thread sealant on the sensor threads because they are factory coated and excess sealant can affect the sensor's capability to detect detonation. Mount the KS into the engine block while securing it to 19 N.m (14 lb ft). Last, connect the wiring harness connector to the knock sensor and drop the vehicle.

OEM 2005 Chevrolet Venture Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2005 Chevrolet Venture Knock Sensor
Part Number: 10456238
$19.36 MSRP: $60.45
You Save: $41.09 (68%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 2.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456238
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2005 Chevrolet Venture Knock Sensor

With a comprehensive array of OEM 2005 Chevrolet Venture Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Venture Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Venture Parts Questions & Experts Answers

Q: How to replace the Knock Sensor (KS) on 2005 Chevrolet Venture?
A: To replace the Knock Sensor (KS), one should raise the vehicle and turn OFF ignition. Pull off the wiring harness connector from the knock sensor and remove the KS from the engine block. When installing the KS, do not use thread sealant on the sensor threads because they are factory coated and excess sealant can affect the sensor's capability to detect detonation. Mount the KS into the engine block while securing it to 19 N.m (14 lb ft). Last, connect the wiring harness connector to the knock sensor and drop the vehicle.

Related 2005 Chevrolet Venture Parts

Alternate Year Models

2004 Chevrolet Venture Knock Sensor