How to Replace an Antenna Cable on 2004 GMC Canyon?

Start Antenna cable replacement work by removing the right front door sill plate and right hinge pillar trim panel and instrument panel compartment door. Detach the radio Antenna cable from the extension cable then pull out the grommet through the hinge pillar opening. Tie a mechanics wire to the Antenna cable before extracting the Antenna mast and screws which fasten the Antenna base. To begin installation divide the cable with its grommet from the routing opening before extracting the Antenna from the vehicle where the mechanics wire should remain in position. Installation begins with attaching the mechanics wire to the Antenna cable end before pulling the cable through the hinge pillar accompanied by the grommet. Tighten the Antenna base's retaining screws to 7.5 n.m (66 lb in) before installing the Antenna mast. Begin by dismantling the Antenna cable from its mechanics wire then place the grommet across the hinge pillar and join the radio Antenna cable to the extension cable. Put back the i/p compartment door followed by the right hinge pillar trim panel then the right front door sill plate.

OEM 2004 GMC Canyon Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Antenna Cables found

View related parts
2004 GMC Canyon Harness Part Number: 25967014
$70.37 MSRP: $127.35
You Save: $56.98 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Radio Antenna
- Replaces: 15107800, 15834698
- Item Weight: 0.40 Pounds
- Item Dimensions: 13.3 x 13.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25967014
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2004 GMC Canyon Cable Part Number: 15133285
Product Specifications
- Other Name: Cable Assembly-Mobile Telephone Antenna; Cable, Radio Antenna
- Item Weight: 0.70 Pounds
- Item Dimensions: 12.9 x 9.8 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15133285
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 GMC Canyon Submodels:
- SL, SLE, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS
View related parts
2004 GMC Canyon Antenna Cable Part Number: 97246052
Product Specifications
- Other Name: Cable Assembly-Radio Antenna; Cable; Cable, Radio Antenna
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.2 x 6.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 97246052
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2004 GMC Canyon Antenna Cable

With a comprehensive array of OEM 2004 GMC Canyon Antenna Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 GMC Canyon Antenna Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 GMC Canyon Antenna Cable Parts and Q&A

Q: How to Replace an Antenna Cable on 2004 GMC Canyon?
A: Start Antenna cable replacement work by removing the right front door sill plate and right hinge pillar trim panel and instrument panel compartment door. Detach the radio Antenna cable from the extension cable then pull out the grommet through the hinge pillar opening. Tie a mechanics wire to the Antenna cable before extracting the Antenna mast and screws which fasten the Antenna base. To begin installation divide the cable with its grommet from the routing opening before extracting the Antenna from the vehicle where the mechanics wire should remain in position. Installation begins with attaching the mechanics wire to the Antenna cable end before pulling the cable through the hinge pillar accompanied by the grommet. Tighten the Antenna base's retaining screws to 7.5 n.m (66 lb in) before installing the Antenna mast. Begin by dismantling the Antenna cable from its mechanics wire then place the grommet across the hinge pillar and join the radio Antenna cable to the extension cable. Put back the i/p compartment door followed by the right hinge pillar trim panel then the right front door sill plate.