OEM 2004 GMC Envoy Alternator

Generator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Alternator found

  • 2004 GMC Envoy Alternator - 19244750
    2004 GMC Envoy Alternator Diagram - 19244750
    View related parts

    2004 GMC Envoy Alternator Part Number: 19244750

    $352.73 MSRP: $688.06
    You Save: $335.33 (49%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Generator Assembly, (Remanufacture); Generator, Engine Electrical
    • Replaces: 19151920, 10464468
    • Item Weight: 16.70 Pounds
    • Item Dimensions: 9.2 x 8.1 x 7.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 19244750
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2004 GMC Envoy Submodels:
    • SLE, SLT | 6 Cyl 4.2 L GAS

2004 GMC Envoy Alternator

With a comprehensive array of OEM 2004 GMC Envoy Alternator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 GMC Envoy Alternator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 GMC Envoy Alternator Parts and Q&A

  • Q: How to replace the alternator on 2004 GMC Envoy?
    A: You must begin by taking off the negative Battery Cable and Drive Belt before proceeding. You must raise the vehicle to a suitable height that allows access to the A/C Compressor through the wheelhouse before removing the left front wheel and left wheelhouse liner. The A/C Compressor electrical connector should be disconnected from its bracket but removal of a/c refrigerant is optional. Thankfully the A/C Compressor's upper bolt needs to stay on the compressor unit through the removal process of its mounting bolts (2, 3). The next step requires lowering the vehicle while moving the protective boot that covers the generator output bat terminal to gain access. Begin by unscrewing the generator output bat terminal nut to disconnect the generator lead from the generator before removing the generator wiring harness connector . Before removing the generator secure clearance by removing three mounting bolts and the engine lift bracket. Place the A/C Compressor in front positioning to access the generator better before removing the generator from the engine compartment. Placement of the generator should be on the engine and installation of the engine lift bracket follows next. Place generator mounting bolts and ensure sequential torque at 50 n.m (37 lb ft). Install the generator output bat terminal nut by tightening it to 20 n.m (15 lb ft) torque specification. Thread the protective boot over the generator output bat terminal before connecting the wiring harness connector to the generator. Lift the vehicle once again to reach the A/C Compressor and set the compressor in place on the engine before screwing in the mounting bolts (2, 3) at 50 n.m (37 lb ft). Install the wheelhouse liner and front wheel on the left side before securing the compressor electrical connector to its bracket. Follow this procedure for Drive Belt installation while you lower the vehicle and reconnect the Battery Cable's negative terminal.

Related 2004 GMC Envoy Parts