How to Replace the Brake Light Switch for Cruise Control on 2004 GMC Envoy?

Start the replacement of the cruise release switch by disconnecting the electrical connector attached to it. First remove the electrical connector from the cruise release switch before removing the switch from the brake pedal bracket by rotating it counterclockwise until it pulls free from the retainer. Finally push the locking tabs inward to release the retainer. Individuals should begin by attaching the electrical connector to the cruise release switch and push the cruise release switch retainer into the brake pedal bracket until all locking tabs are fully engaged.

OEM 2004 GMC Envoy Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2004 GMC Envoy Stoplamp Switch Part Number: 15128874
$34.51 MSRP: $64.40
You Save: $29.89 (47%)
ADD TO CART
Product Specifications
- Other Name: Switch, Stop Lamp; Brake Light Switch; Switch, Stop Lamp Switch
- Replaces: 15163032, 15038393, 25771554, 15161650, 15158767
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.9 x 2.8 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15128874
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2004 GMC Envoy Brake Light Switch

With a comprehensive array of OEM 2004 GMC Envoy Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 GMC Envoy Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 GMC Envoy Brake Light Switch Parts and Q&A

Q: How to Replace the Brake Light Switch for Cruise Control on 2004 GMC Envoy?
A: Start the replacement of the cruise release switch by disconnecting the electrical connector attached to it. First remove the electrical connector from the cruise release switch before removing the switch from the brake pedal bracket by rotating it counterclockwise until it pulls free from the retainer. Finally push the locking tabs inward to release the retainer. Individuals should begin by attaching the electrical connector to the cruise release switch and push the cruise release switch retainer into the brake pedal bracket until all locking tabs are fully engaged.