How to replace the valve rocker arm and push rods on 2004 GMC Savana 1500?

Removing the cover on the valve rocker arm and replacing the valve rocker arm with components in a rack to replace the valve is necessary. Clean and wipe them, and then grease with clean engine oil. Install pivot support and make sure it is properly seated. Turn crankshaft till at TDC, then tighten valve rocker arm bolts. Lastly, the valve rocker arm cover is installed.

OEM 2004 GMC Savana 1500 Rocker Arm

Engine Rocker Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rocker Arm found

View related parts
2004 GMC Savana 1500 Rocker Arms Part Number: 12599650
$57.50 MSRP: $90.07
You Save: $32.57 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Valve Rocker; Rocker Arm; Arm, Engine Valve Rocker
- Replaces: 12555580
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.2 x 2.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 12
- SKU: 12599650
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 GMC Savana 1500 Submodels:
- Base, LS, LT, SLE, SLT | 6 Cyl 4.3 L GAS

2004 GMC Savana 1500 Rocker Arm

With a comprehensive array of OEM 2004 GMC Savana 1500 Rocker Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 GMC Savana 1500 Rocker Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 GMC Savana 1500 Rocker Arm Parts and Q&A

Q: How to replace the valve rocker arm and push rods on 2004 GMC Savana 1500?
A: Removing the cover on the valve rocker arm and replacing the valve rocker arm with components in a rack to replace the valve is necessary. Clean and wipe them, and then grease with clean engine oil. Install pivot support and make sure it is properly seated. Turn crankshaft till at TDC, then tighten valve rocker arm bolts. Lastly, the valve rocker arm cover is installed.