How to Replace a Front Door Window Regulator (Manual) on 2005 Buick Century?

The project for front door Window Regulator replacement starts by removing the front door water deflector followed by removing the front door window. The following step requires removal of the arm rest bracket. The screws which secure the Window Regulator need not be fully taken off because they fit properly into designated slots located within the inner door panel. The front door Window Regulator mounting screws should be loosened before you remove the left lower mounting screw from the front door Window Regulator rail. Users should lower the front door Window Regulator motor into the door to gain access to its electrical connector for disconnecting procedures. Take the front door Window Regulator out of the door following the initial step. Install the front door Window Regulator by placing it into its designated door position then link the electric connector for the motor. Position the motor into the key slots found in the inner door panel before inserting the Window Regulator rail assembly into similar slots. Apply the left lower mounting screw with a torque of 10 nm (89 lb in) while installing it. The sequence to tighten screws on the Window Regulator begins with lower rear and then upper rear followed by lower front and finally upper front before soft tightening to 10 nm (89 lb in). Finish the procedure by installing the front door window and installing the arm rest bracket along with the front door water deflector.

OEM 2005 Buick Century Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Window Regulators found

View related parts
2005 Buick Century Regulator, Front Passenger Side
Part Number: 10334396
$165.47 MSRP: $310.74
You Save: $145.27 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Power Window Motor and Regulator Assembly; Window Regulator
- Position: Front Passenger Side
- Replaces: 10315143, 10413612, 10434881
- Item Weight: 3.50 Pounds
- Item Dimensions: 27.4 x 9.9 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10334396
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2005 Buick Century Window Regulator, Rear Passenger Side
Part Number: 10334398
$161.15 MSRP: $286.48
You Save: $125.33 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator, Rear Door Window Regulator; Power Window Motor and Regulator Assembly; Power Window Regulator Assembly; Regulator
- Position: Rear Passenger Side
- Replaces: 10434885, 10413616, 10442826, 10321733, 10254785, 10315146
- Item Weight: 4.00 Pounds
- Item Dimensions: 21.1 x 10.3 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10334398
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2005 Buick Century Window Regulator, Rear Driver Side
Part Number: 10334399
$157.23 MSRP: $279.50
You Save: $122.27 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator, Rear Door Window Regulator; Power Window Motor and Regulator Assembly; Power Window Regulator Assembly; Regulator
- Position: Rear Driver Side
- Replaces: 10434886, 10321734, 10442827, 10413617, 10254786, 10315147
- Item Weight: 3.30 Pounds
- Item Dimensions: 21.3 x 13.7 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10334399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2005 Buick Century Window Regulator, Front Driver Side
Part Number: 10334397
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Power Window Motor and Regulator Assembly; Power Window Regulator Assembly; Regulator
- Position: Front Driver Side
- Replaces: 10315144, 19245391, 10413613, 10434882
- Item Weight: 4.20 Pounds
- Item Dimensions: 20.6 x 20.0 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10334397
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS

2005 Buick Century Window Regulator

With a comprehensive array of OEM 2005 Buick Century Window Regulator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Century Window Regulator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Century Parts Questions & Experts Answers

Q: How to Replace a Front Door Window Regulator (Manual) on 2005 Buick Century?
A: The project for front door Window Regulator replacement starts by removing the front door water deflector followed by removing the front door window. The following step requires removal of the arm rest bracket. The screws which secure the Window Regulator need not be fully taken off because they fit properly into designated slots located within the inner door panel. The front door Window Regulator mounting screws should be loosened before you remove the left lower mounting screw from the front door Window Regulator rail. Users should lower the front door Window Regulator motor into the door to gain access to its electrical connector for disconnecting procedures. Take the front door Window Regulator out of the door following the initial step. Install the front door Window Regulator by placing it into its designated door position then link the electric connector for the motor. Position the motor into the key slots found in the inner door panel before inserting the Window Regulator rail assembly into similar slots. Apply the left lower mounting screw with a torque of 10 nm (89 lb in) while installing it. The sequence to tighten screws on the Window Regulator begins with lower rear and then upper rear followed by lower front and finally upper front before soft tightening to 10 nm (89 lb in). Finish the procedure by installing the front door window and installing the arm rest bracket along with the front door water deflector.