OEM 2005 Buick Park Avenue Antenna Cable

Radio Antenna Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Antenna Cables found

  • 2005 Buick Park Avenue Antenna Cable - 25631904
    2005 Buick Park Avenue Antenna Cable Diagram - 25631904
    View related parts
    Product Specifications
    • Other Name: Coil, Radio Antenna
    • Replaces: 25629368
    • Item Weight: 0.30 Pounds
    • Item Dimensions: 3.3 x 1.5 x 0.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25631904
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2005 Buick Park Avenue Submodels:
    • Base, Ultra | 6 Cyl 3.8 L GAS
  • 2005 Buick Park Avenue Antenna Cable - 12450724
    2005 Buick Park Avenue Antenna Cable Diagram - 12450724
    View related parts
    Product Specifications
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 8.6 x 9.1 x 2.4 inches
    • Condition: New
    • SKU: 12450724
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following 2005 Buick Park Avenue Submodels:
    • Base, Ultra | 6 Cyl 3.8 L GAS

2005 Buick Park Avenue Antenna Cable

With a comprehensive array of OEM 2005 Buick Park Avenue Antenna Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Park Avenue Antenna Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Park Avenue Parts Questions & Experts Answers

  • Q: How to replace the antenna cable on 2005 Buick Park Avenue?
    A: To change the ant camera coex cable,strate first by removing the left sail panel ,then disconnect the ant coex cable from the antenna module. The next steps would be to take off the rear shelf trim panel, rear seat cushion, rear seat back, front seat, and left closeout/insulator panel as well. Pull the antenna off the radio, folding the left side of the carpet inward to see the main body wiring harness without cutting the anterior cable from the main body harness. Trim off the ends of the cable at the body harness near the rocker panel, leaving the old cable as is. For installation, run the new antenna coaxial cable alongside the harness, and zip tie it to the body wiring harness. This will connect the antenna coaxial cable to the radio as well as to the antenna module. Finally, reinstall the carpet, front seat, rear seat back, rear seat cushion, rear shelf trim panel, rear sail trim panel should be reinstalled on the left side.

Related 2005 Buick Park Avenue Parts