ChevyParts
My Garage
My Account
Cart
OEM 2005 Buick Rainier Antenna Cable
Radio Antenna Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Antenna Cables found
2005 Buick Rainier Antenna Cable
Part Number: 15065300$32.32 MSRP: $60.70You Save: $28.38 (47%)Ships in 1 Business DayProduct Specifications- Other Name: Cable, Radio Antenna; Base
- Replaced by: 25893238
- Item Weight: 0.50 Pounds
- Item Dimensions: 10.9 x 10.2 x 2.2 inches
- Condition: New
- SKU: 15065300
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2005 Buick Rainier Antenna Cable
Part Number: 88987796$16.22 MSRP: $25.40You Save: $9.18 (37%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cable Assembly, Navigation Antenna Coaxial
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.4 x 7.7 x 2.9 inches
- Condition: New
- SKU: 88987796
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2005 Buick Rainier Cable
Part Number: 15235643$33.89 MSRP: $61.33You Save: $27.44 (45%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable, Radio Antenna
- Item Weight: 0.40 Pounds
- Item Dimensions: 10.0 x 6.4 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15235643
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2005 Buick Rainier Antenna Cable
With a comprehensive array of OEM 2005 Buick Rainier Antenna Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Rainier Antenna Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2005 Buick Rainier Parts Questions & Experts Answers
- Q: How to Replace an Antenna Cable on 2005 Buick Rainier?A: To replace Antenna Cable, open the instrument panel (I/P) compartment fully and disconnect the radio Antenna Cable from the radio extension cable. Take out the lower rear part of the wheelhouse panel, or reach behind it to remove Antenna Cable and gromomet assembly from the cowl hole. Pass the radio Antenna Cable assembly end through the opening at the cowl and slide out the Antenna mast. Lift the hood, remove the radio Antenna Cable assembly retaining screws and push the Antenna Cable and grommet assembly through the fender opening and remove the assembly from the vehicle. For installation, start by installing the radio Antenna Cable assembly back into a vehicle, and route the Antenna appliance and grommet assembly through a fender opening. Screw up the retaining screws on the radio Antenna Cable assembly to 2.8 n.m (25 lb in). Shut the hood down close the mast Antenna and squeeze recovery in behind the wheelhouse panel to get the end of the radio Antenna Cable assembly through the cowl opening. Install the Antenna Cable grommet assembly to cowl opening, reconnect wheelhouse panel, plug radio Antenna Cable into radio extension cable, lastly, close i/p compartment.
Related 2005 Buick Rainier Parts
2005 Buick Rainier Antenna
2005 Buick Rainier Antenna Base
2005 Buick Rainier Automatic Transmission Shift Position Sensor Switch
2005 Buick Rainier Back Up Light Switch
2005 Buick Rainier Battery Fuse
2005 Buick Rainier Daytime Running Light Relay
2005 Buick Rainier Fuel Level Sensor
2005 Buick Rainier Fuel Pump Relay
2005 Buick Rainier Fuse
2005 Buick Rainier Fuse Box
2005 Buick Rainier Headlight Relay
2005 Buick Rainier Relay