How to replace the Body Control Module (BCM) on 2005 Cadillac XLR?

Begin your bcm replacement by turning off the ignition since electrical discharge damage will occur. Also avoid contacting bcm connector pins and the board circuitry. Disconnect the bcm power connections only while the ignition is off, including Battery Cable, connectors, fuses, and jumper wires. Do not force bcm electrical connectors to their proper orientation since these parts match up by design and harm only occurs when using excessive force. First step is removing the kick-up panel at the right front floor. Then extract the 3 retaining screws that keep the bcm attached to the multiuse bracket. Take off the bcm from the vehicle by disconnecting its power cables. Install the components after turning off the Ignition Switch by mating the harness connectors to the bcm. Place the bcm on the multiuse bracket and use 3 screws to fix it into position. Tighten screws to 2.5 n.m (22 lb in). End by replacing the kick-up panel and setting up a new or replacement bcm within the vehicle.

OEM 2005 Cadillac XLR Body Control Module

BCM

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Body Control Modules found

View related parts
2005 Cadillac XLR Body Control Module
Part Number: 15286124
Product Specifications
- Other Name: Module Assembly-Body Control; Module; Module, Body Multi Function Electric Computer; Module, Door Electric And Vacuum Locks
- Replaces: 10353879, 15216952
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.1 x 5.2 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15286124
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac XLR Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2005 Cadillac XLR Receiver
Part Number: 25748918
Product Specifications
- Other Name: Receiver Assembly-Traffic Information
- Item Weight: 1.20 Pounds
- Item Dimensions: 13.3 x 5.7 x 5.3 inches
- Condition: New
- SKU: 25748918
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2005 Cadillac XLR Submodels:
- Base, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Cadillac XLR Module
Part Number: 10348799
Product Specifications
- Other Name: Module, Theft Deterrent Or Front/Rear/Side Object; Module,Theft Deterrent Or Front/Rear/Side/Intake Object
- Position: Rear
- Replaces: 10317519
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.9 x 5.5 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10348799
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2005 Cadillac XLR Body Control Module

With a comprehensive array of OEM 2005 Cadillac XLR Body Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Cadillac XLR Body Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Cadillac XLR Parts Questions & Experts Answers

Q: How to replace the Body Control Module (BCM) on 2005 Cadillac XLR?
A: Begin your bcm replacement by turning off the ignition since electrical discharge damage will occur. Also avoid contacting bcm connector pins and the board circuitry. Disconnect the bcm power connections only while the ignition is off, including Battery Cable, connectors, fuses, and jumper wires. Do not force bcm electrical connectors to their proper orientation since these parts match up by design and harm only occurs when using excessive force. First step is removing the kick-up panel at the right front floor. Then extract the 3 retaining screws that keep the bcm attached to the multiuse bracket. Take off the bcm from the vehicle by disconnecting its power cables. Install the components after turning off the Ignition Switch by mating the harness connectors to the bcm. Place the bcm on the multiuse bracket and use 3 screws to fix it into position. Tighten screws to 2.5 n.m (22 lb in). End by replacing the kick-up panel and setting up a new or replacement bcm within the vehicle.