ChevyParts
My Garage
My Account
Cart
OEM 2005 Cadillac XLR Antenna Cable
Radio Antenna Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Antenna Cables found
2005 Cadillac XLR Antenna Cable
Part Number: 13581174$108.03 MSRP: $211.50You Save: $103.47 (49%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable Kit, Radio Antenna; Cable
- Item Weight: 0.30 Pounds
- Item Dimensions: 12.4 x 10.2 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13581174
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable Assembly-Radio Antenna; Cable, Radio Antenna
- Item Weight: 0.50 Pounds
- Item Dimensions: 15.2 x 4.7 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10317571
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable, Radio Antenna
- Position: Driver Side
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.2 x 3.4 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10318391
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable, Radio Antenna
- Position: Passenger Side
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.1 x 3.3 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10318392
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2005 Cadillac XLR Antenna Cable
With a comprehensive array of OEM 2005 Cadillac XLR Antenna Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Cadillac XLR Antenna Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2005 Cadillac XLR Parts Questions & Experts Answers
- Q: How to replace the antenna cable on 2005 Cadillac XLR?A: Start by removing the right door sill plate and right lock pillar trim to replace an antenna cable. The I/P wiring harness must release from its body retaining clips before removing the push-in retainers attached to the floor panel support. Pull out the antenna coaxial cable from both the radio control coaxial cable and I/P wiring harness before removing the I/P right lower insulator panel. Start by detaching the coaxial cable from the insulation tape that runs on the hinge pillar then move to remove the windshield side garnish moldings together with sunshades and windshield upper garnish molding. Before removing the coaxial cable from the vehicle, disconnect the connector from the front windshield antenna and peel off the tape that attaches to the windshield frame. When installing the coaxial cable position it in the front windshield before applying new tape to fasten it to the windshield frame. After connecting the coaxial cable to the front windshield antenna connector you can reinstall the windshield upper garnish molding along with sunshades and windshield side garnish moldings. Place the coaxial cable on the insulation tape which runs along the hinge pillar and then continue to the I/P right lower insulator panel. Set the push-in retainers to the floor panel support before attaching the I/P wiring harness to the body retaining clips. Complete the connection of the coaxial cable to the antenna module wire harness lead before installing the left lock pillar trim and the left door sill plate.
Related 2005 Cadillac XLR Parts
2005 Cadillac XLR Antenna
2005 Cadillac XLR Body Control Module
2005 Cadillac XLR Coolant Temperature Sensor
2005 Cadillac XLR Engine Control Module
2005 Cadillac XLR Fuel Level Sensor
2005 Cadillac XLR Fuel Pump Relay
2005 Cadillac XLR Fuse Box
2005 Cadillac XLR Instrument Cluster
2005 Cadillac XLR Knock Sensor
2005 Cadillac XLR Seat Switch
2005 Cadillac XLR Suspension Control Module
2005 Cadillac XLR Wiper Motor