ChevyParts
My Garage
My Account
Cart
OEM 2005 Chevrolet Avalanche 1500 Ball Joint
Control Arm Joint- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Ball Joints found
2005 Chevrolet Avalanche 1500 Lower Ball Joint, Front Part Number: 19207137
$75.64 MSRP: $129.88You Save: $54.24 (42%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 12472820, 12475477
- Item Weight: 2.20 Pounds
- Item Dimensions: 7.0 x 4.4 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19207137
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2005 Chevrolet Avalanche 1500 Lower Ball Joint, Front Part Number: 12475478
$103.35 MSRP: $161.18You Save: $57.83 (36%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 12472819
- Item Weight: 2.00 Pounds
- Item Dimensions: 7.0 x 3.7 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12475478
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2005 Chevrolet Avalanche 1500 Ball Joint
With a comprehensive array of OEM 2005 Chevrolet Avalanche 1500 Ball Joint, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Avalanche 1500 Ball Joint are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2005 Chevrolet Avalanche 1500 Ball Joint Parts and Q&A
- Q: How to replace the upper ball joint on 2005 Chevrolet Avalanche 1500?A: To replace the upper Ball Joint the vehicle must first go up on a lift with the tire and wheel removed. Take out bolt and nut that fasten the bracket to the axle structure before you detach the bracket from the axle. To take the brake hose bracket from the axle you must remove its holding bolt first. The j 44664 upper Ball Joint nut remover needs to be used to take out the nut that holds the Steering Knuckle's upper Ball Joint in place. Fatigue the Steering Knuckle using the j 44663 upper Ball Joint remover and then push out the upper Ball Joint stud from its socket. Complete the removal process by taking the upper Ball Joint out of the vehicle. Place the upper Ball Joint onto the Steering Knuckle before installing its retaining bolts and stud. Tighten them to 110 nm (81 ft.lbs). Secure the upper Ball Joint to Steering Knuckle using j 44664 tool while tightening it to 200 nm (147 ft. Lbs.). Attach the bracket back to the axle after fitting both the bolt and nut which needs 25 nm (18 ft. Lbs.) torque. Fasten the bolt to hold the brake hose bracket onto the axle. Tighten it to 12 nm or 106 inch pounds. Reinstall the tire and wheel afterward a four-wheel alignment check.
Related 2005 Chevrolet Avalanche 1500 Parts
2005 Chevrolet Avalanche 1500 Alignment Bolt
2005 Chevrolet Avalanche 1500 Coil Spring Insulator
2005 Chevrolet Avalanche 1500 Coil Springs
2005 Chevrolet Avalanche 1500 Control Arm
2005 Chevrolet Avalanche 1500 Control Arm Bushing
2005 Chevrolet Avalanche 1500 Shock Absorber
2005 Chevrolet Avalanche 1500 Steering Knuckle
2005 Chevrolet Avalanche 1500 Sway Bar Bracket
2005 Chevrolet Avalanche 1500 Sway Bar Bushing
2005 Chevrolet Avalanche 1500 Sway Bar Kit
2005 Chevrolet Avalanche 1500 Sway Bar Link
2005 Chevrolet Avalanche 1500 Torsion Bar