How to service and repair the Rack and Pinion steering gear on 2005 Chevrolet Aveo?

The Rack And Pinion repair process begins with rack gear examination for damage before moving on to checking pinion gear along with the valve assembly and finishing the inspection with Tie Rod and Ball Joint examination. Before installation read guide from service precautions followed by pinion lock nut tightening to 30 nm (22 ft. Lbs.). First, install both the adjust nut and its lock nut followed by the Tie Rod while tightening the rod to 100 nm (75 ft. Lbs.).

OEM 2005 Chevrolet Aveo Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack And Pinion found

View related parts
2005 Chevrolet Aveo Steering Gear
Part Number: 96425093
Product Specifications
- Other Name: Gear Assembly, Steering; Gear Assembly; Gear, Steering
- Replaces: 96535298
- Item Weight: 16.30 Pounds
- Item Dimensions: 60.9 x 10.3 x 9.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96425093
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2005 Chevrolet Aveo Rack And Pinion

With a comprehensive array of OEM 2005 Chevrolet Aveo Rack And Pinion, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Aveo Rack And Pinion are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to service and repair the Rack and Pinion steering gear on 2005 Chevrolet Aveo?
A: The Rack And Pinion repair process begins with rack gear examination for damage before moving on to checking pinion gear along with the valve assembly and finishing the inspection with Tie Rod and Ball Joint examination. Before installation read guide from service precautions followed by pinion lock nut tightening to 30 nm (22 ft. Lbs.). First, install both the adjust nut and its lock nut followed by the Tie Rod while tightening the rod to 100 nm (75 ft. Lbs.).