OEM 2005 Chevrolet Cavalier Wiper Motor

2005 Chevrolet Cavalier Parts Questions & Experts Answers

• Q: How to replace the wiper motor on 2005 Chevrolet Cavalier?

  A: Start wiper motor replacement by removing the air inlet grille as well as disconnecting the wiper motor electrical connector. You need to start by removing the screws from the wiper drive system module before taking it out of the vehicle. The Wiper Transmission Separator (J 39232) allows users to disconnect transmission from the wiper motor crank arm after which they can unscrew and remove the wiper motor from the wiper drive system module. Put the new wiper motor into the drive system module before tightening its screws to 10 N.m (89 lb in). Apply grease to the motor crank arm pivot because it operates as a greased joint in the wiper transmission. Insert the wiper transmission arms into the wiper motor crank arm position using the Wiper Transmission Installer (J 39529). Place the module back into the vehicle slot before screwing it down with 10 N.m (89 lb in). Install the air inlet grille panel while also reconnecting the wiper motor electrical connector and testing wiper operations.