OEM 2005 Chevrolet Classic Rack and Pinion Boot

2005 Chevrolet Classic Parts Questions & Experts Answers

• Q: How to replace the rack and pinion boot and breather tube on 2005 Chevrolet Classic?

  A: Begin Rack and Pinion Boot and breather tube replacement off the vehicle by utilizing keystone clamp pliers (J 22610) to remove the outer tie rod. Start by removing the hexagon jam nut from the inner tie rod assembly then detach the tie rod end clamp from the Rack and Pinion Boot. Use side cutters to detach the boot clamp from the Rack and Pinion Boot then dispose of it. A breather tube present requires marking its installation spot on the gear assembly prior to removing the Rack and Pinion Boot and breather tube. Place a new boot clamp on the Rack and Pinion Boot before you apply grease to the inner tie rod assembly and the Rack And Pinion gear assembly. After that, secure the Rack and Pinion Boot onto the inner tie rod assembly. Follow removal markings to position the breather tube properly on its molded nipple in the Rack and Pinion Boot. The Rack and Pinion Boot should have a smooth layout without any twisting or puckering. Manual adjustments are needed before placing the Rack and Pinion Boot into the gear assembly groove for correct fitment. Upon Rack and Pinion Boot installation, employ keystone clamp pliers (J 22610) to install the boot clamp and complete the crimping operation. Seating the tie rod end clamp requires you to pinch the pliers before mounting it on the Rack and Pinion Boot. Next, you can finish building the outer tie rod assembly by applying the hexagon jam nut on the inner tie rod assembly.