How to replace the Brake Light Switch on 2005 Chevrolet Cobalt?

To install the new stop lamp switch you must first remove the accelerator pedal retaining nuts for access. Push the stop lamp switch in the opposite direction while rotating it counterclockwise to detach it from the vehicle. After that disconnect the electrical connection. Fix the new stop lamp switch by linking its electrical connector to the switch, placing the unit in the holder, and reattaching the accelerator pedal to the dash panel with locking nuts turned until they reach 10 n.m of tension (89 lb in). Complete the process by readjusting the stop lamp switch.

OEM 2005 Chevrolet Cobalt Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2005 Chevrolet Cobalt Brake Switch
Part Number: 12450036
$15.36 MSRP: $24.02
You Save: $8.66 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Cruise Control; Brake Light Switch; Release Switch; Stoplamp Switch; Transmission Safety Start/Warning; Converter Switch
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.3 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12450036
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2005 Chevrolet Cobalt Brake Light Switch

With a comprehensive array of OEM 2005 Chevrolet Cobalt Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Cobalt Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Cobalt Parts Questions & Experts Answers

Q: How to replace the Brake Light Switch on 2005 Chevrolet Cobalt?
A: To install the new stop lamp switch you must first remove the accelerator pedal retaining nuts for access. Push the stop lamp switch in the opposite direction while rotating it counterclockwise to detach it from the vehicle. After that disconnect the electrical connection. Fix the new stop lamp switch by linking its electrical connector to the switch, placing the unit in the holder, and reattaching the accelerator pedal to the dash panel with locking nuts turned until they reach 10 n.m of tension (89 lb in). Complete the process by readjusting the stop lamp switch.