How to replace the Brake Light Switch on 2006 Chevrolet Cobalt?

You need to take off the accelerator pedal nuts before moving it aside to replace the stop lamp switch. Push the stop lamp switch while turning it counterclockwise and pulling toward the vehicle front to take it out. Then disconnect the electrical wire. To install the part connect the electrical cord to the switch and put the switch in its holder before reinstalling the pedal with retaining nuts tightened to 10 n.m (89 lb in). You should last adjust the stop lamp switch to the correct position.

OEM 2006 Chevrolet Cobalt Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2006 Chevrolet Cobalt Brake Switch
Part Number: 12450036
$15.36 MSRP: $24.02
You Save: $8.66 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Cruise Control; Brake Light Switch; Release Switch; Stoplamp Switch; Transmission Safety Start/Warning; Converter Switch
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.3 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12450036
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2006 Chevrolet Cobalt Brake Light Switch

With a comprehensive array of OEM 2006 Chevrolet Cobalt Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Cobalt Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Cobalt Parts Questions & Experts Answers

Q: How to replace the Brake Light Switch on 2006 Chevrolet Cobalt?
A: You need to take off the accelerator pedal nuts before moving it aside to replace the stop lamp switch. Push the stop lamp switch while turning it counterclockwise and pulling toward the vehicle front to take it out. Then disconnect the electrical wire. To install the part connect the electrical cord to the switch and put the switch in its holder before reinstalling the pedal with retaining nuts tightened to 10 n.m (89 lb in). You should last adjust the stop lamp switch to the correct position.